Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You must remove from it's mount and empty out any fluids that is in tank.fill the tank with water and locate where the leak is coming from. wash tank a few times and the let dry upside down. Get some sand paper (80 grit course) and sand area where leak is, clean area with a vacume or clean rag.you can buy a 2 stage epoxy that comes in an injection form and squeeze it out on a pc of paper and then get a q-tip and mix the 2 components together, fill the crack or hole generously with the q-tip, if you have to,let dry for 24 hours and mix more and put more on. let dry another 24 hours, replace tank back in it's place and you've solved your leak. (epoxy does wonders if its used properly.
Posted on Nov 23, 2008
Hello, the washer fluid fill is the same as the front windshield washer tank. They use separate pumps though. If you are not getting any fluid to the back glass when you try it, you may have a restriction or either a bad pump. Please rate my answer, thank you.
Posted on Mar 02, 2009
Had the same problem with my 2001 330ci. If not used frequently the pump will get waterlogged and allow fluid to seep into the motor. I was able to disassemble, clean, and rebuild my pump but I would recommend replacing it, it is not expensive at around $20-30 and easy to change.
The washer pump is inserted into a hole on the washer tank itself. It is an interference fit so it will pop out. If you have significant amount of fluid in the tank it will leak out of the hole. There should be one hose connected with a clamp and one electrical connector. I believe there may be a plastic shroud covering it which needs to be unsnapped.
Posted on Jun 25, 2009
Tips for a great answer:
Apr 13, 2015 | 2001 Ford Explorer Sport Trac
Mar 04, 2015 | Chrysler PT Cruiser Cars & Trucks
Nov 27, 2013 | Volvo Cars & Trucks
Nov 07, 2010 | 1998 Dodge Dakota
Mar 13, 2010 | 1998 Mitsubishi Montero Sport
Jan 04, 2010 | 1998 Pontiac Grand Prix
Nov 29, 2009 | 1998 Chrysler Concorde
Mar 02, 2009 | 2000 Chevrolet Venture
41 people viewed this question
Usually answered in minutes!