Question about 2007 Chevrolet Uplander

Open Question

Turn signal brake lifgt fuse circut breaker keeps blowing

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

co7196
  • 3433 Answers

SOURCE: Fuse for trailer right turn signal and brake blows intermittently

abad ground on that tail light unit could affect current load when turn and stop are used simultaneously. Although one side only is affected make sure of good grnd between trailer and tow vehicle. focust on the tail light unit in question. Replace the bulb. though rare, bulbs have been known to be the problem. If the bulb is breaking filiments ck the filiment orientation. filiments last longer in vertical orientation, where horizontal permits vibration to break the heated filiment when brake is applied.. good luck and let me know if This helped or not.

Posted on May 06, 2009

polarcycle
  • 1392 Answers

SOURCE: My turn signals/hazard lights aren't working, fuse--Chevy Tahoe

look for your short somewhere in the wiring harness.

Posted on Jul 23, 2009

  • 87 Answers

SOURCE: 1992 chevy s10 no brake lights or turn signals

Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Posted on Aug 02, 2009

  • 1 Answer

SOURCE: gauges blow fuses,brake and turn signal lights dont work

all my gauges quit working and my turnsignals checked all my fuses under the hood and dash whats my problem?

Posted on Mar 03, 2010

  • 82 Answers

SOURCE: My turn signal fuse keeps blowing why?

I am thinking you might have a electrical short in your steering column

Posted on May 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Ranger 10 amp fuse keeps blowing no brake lights,abs, turn signals?


Fuses blow because there is an overload on the system. If the fuse blows when you step on the brakes then there may be a short in the wiring from the brake light switch to the lights, abs module or turn signal switch. If the fuse blows when you turn the key on then there is likely a short in the wiring to the brake light switch. Basically you will need a wiring schematic to check the wires at the switch and at each of the loads. Also verify that the fuse is supposed to be a 10 amp fuse. Hope this helps

Mar 27, 2017 | Ford Cars & Trucks

1 Answer

My F450 class C motor home keeps blowing the fuse #36 for the instrument panel lights


If possible check all running lights,they are usually on the same circuit. You may want to put a circuit breaker in place of fuse for testing

Sep 27, 2015 | Cars & Trucks

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

2 Answers

Brake lights wont work unless turn signal is on


Wild guess, crossed wires, bad printed circut film connector in tail lights, bad ground connection to the same film. Otherwise, wiring problems up front. signial/ break circuts.

Mar 04, 2015 | 1999 GMC Jimmy

1 Answer

Brack lights wont light up on my 1988 ford ranger we keep blowing fuse and put in new brake switch


If you keep blowing the brake fuse than you have a short in the system. Unplug the brake switch. Install a new fuse. If it did not blow than the problem is after the brake switch. Next unplug the turn signal switch, then plug the stop light switch back in and press the brake pedal. Did the fuse blow. If not than the wiring is good in between the two switches. With the turn signal switch disconnected use a jumper wire in between the light green wire (power from the brake switch) and the orange with light blue wire (power to the right brake lamp). If the fuse blows than there is a short in the right side brake circuit between the plug in and the rear socket assembly. If the fuse does not blow than jump from the light green wire to the Light green with orange wire (power to the left brake lamp). If the fuse blows than the problem is in the left hand brake wiring circuit.

Sep 04, 2013 | Cars & Trucks

1 Answer

Power Windows and Turn Signals Not Working - 15A Fuse keeps blowing


If a fuse keeps on blowing there is a short in the wireing to that circut, Your best bet is to take it into a auto electric shop to be check out,

Nov 28, 2012 | 2005 Subaru Impreza 2.5

1 Answer

My 2005 buick rendezvous keeps blowing the fuse for the turn signals and brake lights. Fuse #42 in the inside fuse panel. this just started happening two days ago. Nothing is different with the car.


most likely caused by a short, could be any were. start with the light assembleys remove it and clean any rusty or coroded spotspull all bulbs clean and or replace .auto parts stores sell an electrical parts wash about 9 to 14 $ . spray as needed let dry and put back together.if it still blows fuses its some ware in the wire s , could also be at the turn signal switch or the brake switch . you would have to get it to blow to figure out witch one it is and witch one it is not example put in new fuse then keep putting on the brakes if not blown then keep doin the turn signal then check to see if blown

Jul 26, 2010 | Buick Rendezvous Cars & Trucks

1 Answer

2006 f150 keeps blowing turn signal fuse


It sounds like the fuse is doing what it is supposed to do, and burning out when there is a short circuit. Check the wiring from the fuse block back to the lights and pay special attention to the trailer connection.

Oct 09, 2009 | 2006 Ford F-150

1 Answer

Fuse for trailer right turn signal and brake blows intermittently


abad ground on that tail light unit could affect current load when turn and stop are used simultaneously. Although one side only is affected make sure of good grnd between trailer and tow vehicle. focust on the tail light unit in question. Replace the bulb. though rare, bulbs have been known to be the problem. If the bulb is breaking filiments ck the filiment orientation. filiments last longer in vertical orientation, where horizontal permits vibration to break the heated filiment when brake is applied.. good luck and let me know if This helped or not.

Apr 26, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Brake lights and crusie don't work


1ST THING TO CHECK IS THE STOP LAMP FUSE . FUSES LOCATED LH SIDE UNDER HOOD. THIS FUSE ALSO POWERS THE ACC. CIRCUT IN TRUCK. ALOT OF TIMES, LAP TOPS, DVD PLAYERS ETC. OVERLOAD CIRCUT & FUSE BLOWS.

Oct 25, 2008 | 2002 GMC Yukon Denali

Not finding what you are looking for?
2007 Chevrolet Uplander Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...