Question about 2002 Jaguar X-Type

Open Question

Replace o2 sensor bank 2 in 2005 hyundai tucson

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Check engine light on, scan code p0175. I already change MAF and check O2 sensors. have you any advice?


code p 0175 refers to system too rich bank 2===causes --intake blocked ---EVAP canister purge valve ---fuel pressure ---EGR system---injector/s ---HO2S
basically you changed the wrong sensor as the HO2S sensor is the sensor in the exhaust manifold or before the cat converter
It tells the ECM to adjust the injector flow for that bank to a leaner mixture (O2 sensors are after the cat and tell the ECM if the mixture is right for complete burn
it could be from a bad injector that is leaking at the tip and the ECM cannot control the fuel mix

Jan 21, 2016 | 2006 Hyundai Tucson 4WD 2.7L V6

1 Answer

Where is the 02 Oxygen Sensor before the cadalic converter on a 2006 Hyundai Santa Fe


Usually these are located on the exhaust manifold or just below the exhaust manifold and you should be able to see it in the engine bay. On V6 engines there will be one sensor on each of the 2 exhaust banks.
You will probably need to remove the engine cover to see the sensors on your exhaust.

If someone told you to replace these because you got a particular fault code I would be wary. A decent scan tool and basic diagnostics can show if the 02 sensor is working or not. Some faults often blamed on an 02 sensor are not due to faulty sensors.

Jan 09, 2016 | 2006 Hyundai Santa Fe

3 Answers

PO-139 I had that sensor change 3 weeks ago and the check engine light came on again this morning.Thanks


Probably replaced a good sensor. This codes could be from a bad sensor, a vacuum leak, or an exhaust leak before the sensor.

Dec 01, 2015 | 2006 Hyundai Tucson

1 Answer

Where are the sensors located on a 2007 hyundai tucson 6cyl.Are where is bank 2 sensor 1 located.


Passenger side exhaust upstream of the cat, however if you are going to replace 1 do both upstream o2 sensors and get them from hyundai, use vin # i believe these use wide band sensors

Apr 17, 2015 | 2007 Hyundai Tucson

2 Answers

2005 Hyundai Tucson 2.7L 2WD


P0430 is a catalyst efficiency code. If there are no leaks in the exhaust or any vacuum leaks that could affect O2 sensor operation and the O2 sensors are working properly then it's possible that you need a catalytic converter. If you have access to a scanner capable of reading live data plug it in and take the vehicle on the high way at a steady 55-60 mph. The O2 sensor should read somewhere around 700 mv give or take but should not fluctuate to much. If it does you need a catalyst bank #2. Good luck!

Apr 10, 2014 | Cars & Trucks

1 Answer

Location bank 1 o2 sensor


What year and model Hyundai?

Oct 04, 2013 | Hyundai Accent Cars & Trucks

2 Answers

What does the code p1166 mean for a hyundai elantra 2003


P1166 O2 Sensor - controller adaption diagnosis malfunction (bank 1).

Trouble area:

* P1166 is case for HO2S (Bank 1, Sensor 1) Signal line open
* Fuel system (Fuel tank/Pressure regulator/Fuel pump/PSV) failure
* Poor connection to fuel line hose/sealing/cut
* Sealing between purge valve and fuel tank
* Air leakage in exhaust system
* Ignition system (ignition coil, spark plug, cable) failure
* Surge tank and intake port failure

Oct 16, 2009 | Hyundai Motor 2003 Elantra

Not finding what you are looking for?
2002 Jaguar X-Type Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...