Question about 2007 Ford Galaxy

Open Question

My cruise control has gone into standby mode - 2007 Ford Galaxy

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

5 Answers

How come my cruise control won't even light up, much less work? 2004 trailblazer

has a fuse and an actuator motor or
the set resume switch could be faulty

May 31, 2016 | 2004 Chevrolet TrailBlazer

1 Answer

Electronic cruise control

sounds like you are letting your foot off the gas before
the cruise is complete try holding your foot on the gas until you know for sure the cruise has taken over.

Nov 20, 2013 | Chrysler Cars & Trucks

1 Answer

Cruise control problem

Sounds like you have a speed sensor gone bad

May 06, 2013 | Cars & Trucks

2 Answers


There should be a Cruise Control relay too. Find one thats the same and switch them out, like the horn relay. If the Cruise starts working then you have a bad relay.

Dec 03, 2012 | 1994 Lincoln Mark VIII

2 Answers

Cruise control relay

There is a switch next to the brake light switch. It is actuated by the brake pedel. On the brake pedal there is a little urethane/rubber bumper. If that is gone then it will appear to the switch that the brakes are pressed. Any chance you found some rubber parts on the floor under your brake pedal?m On my 92 SE-R I found this urethane material and did not know where it came from. Then I noticed my cruise did not work. Then I noticed that my brake lights were staying on. I found these two switches (brake and cruise) were not making up because the rubber bumpers were gone. relay is located under the hood on the drivers side

Jun 21, 2012 | 1993 Nissan Sentra 4 Door

1 Answer

2005 Malibu Maxx cruise control won't turn on. Worked one day next day would not.

this could be a blown fuse(which you can check) or a mis-adjusted cruise cut out switch that works off of the brake may want to go to a shop that can check the cruise with a tool that has the capablilities to check cruise controls as it could be a switch or control unit that has gone bad.

Apr 14, 2011 | Chevrolet Malibu Maxx Cars & Trucks

1 Answer

I had tried to use my cruise control on my 2002 pt cruiser and it wouldnt work what could it be

being that it is a 2002 I believe it will have electronic cruise and not vacuum power. so I would check your cruise control fuse and button. If all of those are OK, then its possible that the cruise control servo has gone out. That it the box that controls the throttle while engaged. You can find it by tracing the two cables coming from your throttle body. One leads through the firewall to your gas pedal, and the other will lead to you cruise control servo.

Nov 15, 2009 | 1999 Chrysler Concorde

1 Answer

Cruise control will not engage even though the indicator on the Cruise on/off switch is illuminated.

Check that your brake lights are staying off. Brake light switch will put your cruise control into coast mode.

Sep 09, 2009 | 2004 Saturn VUE

1 Answer

2005 Jeep Wrangler Cruise Control

no fuse ...sounds like the switch may have gone bad

Nov 08, 2008 | 2005 Jeep Wrangler

1 Answer

1990 460 cruise control


May 16, 2008 | 1990 Ford F350

Not finding what you are looking for?
2007 Ford Galaxy Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides