Question about 2000 Dodge Caravan

1 Answer

Turning signals work intermittently

Both side blinkers may or may not work at any given time but the emergency flashers work ok any ideas?

Posted by on

  • Anonymous May 14, 2009

    Same thing, blinkers on 2000 Dodge Caravan work intermittently, no apparent cause.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Most likely cause will be your indicater stalk (control) needs replacing, most likely because of worn contacts.

Posted on Mar 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram for how to find the flasher in a 1999 dodge stratus..it's not in the fuse boxes


Simple method without mystery:
  1. Turn blinker flashers on;
  2. Listen for clicking;
  3. Find source of clicking. It is the flasher. :)
NOTE: Emergency flashers and blinkers usually use a separate flasher unit, but one is close to the other. If your blinkers do not work but your emergency flashers do, find the emergency flasher unit by finding the source of clicking, then locate the blinker flasher nearby. They will ALWAYS be underneath the dashboard on the driver side.

May 11, 2015 | 1999 Dodge Stratus

1 Answer

1998 dodge durango, when I turn the key on, or to the lock position, the flasher fuse relay on the driver side makes a loud buzzing sound. I replaced the fuse relay and checked all the fuses. Any ideas on...


IM NOT SURE.
BUT fix the emergency flasher failure
first using the logic, gee you see its busted,why on fix that and pray.
military doctrine does that too, and then says if 2 things wrong fix the simple one first. (getting lucky save time and dead solders)
10x that if related, and is. ! IMO
noise here,and bad emerg.. kind if same area.
the issue with the emerg. flasher is the contacts can mangle inside
and confuse related circuits. flashers, and warning modules.

Jan 19, 2015 | 1998 Dodge Durango

1 Answer

Neighor has 1996 sentra i have 2001 altima his blinkers dont work but emergency flasher do all fuses relays and switch work tested by pluging them up in mine but go back into his and they dont work any...


i would think that it must be a wiring fault as you have done a thorough test of the components, has there been any work done on the vehicle which may have loosened a connector ?if not its going to be a labourious job of testing wiring from switch to the relay , as we know the wiring from relay is ok as emergency flashers work good luck

Oct 23, 2014 | Cars & Trucks

1 Answer

Flasher repair


First, check your bulbs by starting up the vehicle and turning on the blinkers, then go around to check them. Also check to see if your emergency flasher work.
The fuses are either behind the glove box or under the dash on the driver's side.
Look on fixya, someone had the same problem back in April and several ideas were posted.
Good luck!

Jul 01, 2014 | 1995 Isuzu Rodeo

1 Answer

The blinkers only work some of the time. All bulbs are good and the emergency flashers work. I found the flasher for the blinkers, but if it is bad, will the blinkers work some of the time and other times...


you need a signal flasher to correct the problem.flashers will act this way some times when they have an internal problem with the bi-metallic strip that actually completes the circuit and makes the clicking sound.make sure you have found the signal flasher and not the hazard flasher as they look the same.with the hazard flashers on you can see what the signal flasher will look like and it is in the fuse panel.

Mar 25, 2011 | 1987 Ford Taurus

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

1 Answer

Blinker dont work flasher and other lights work


The turn signals don't work, but the emergency flashers do? If that's the case, replace the flasher, you have 2 flashers, one for emergency (hazard) flasher, and one for the turn signals. It should be on the fuse block under the dash.

Oct 23, 2008 | 1995 Jeep Cherokee

3 Answers

Blinkers stopped working


Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.

Oct 20, 2008 | 1996 Ford F150 Regular Cab

1 Answer

Diagram


ok, the dash does not show the blinker is on, did you check the front and back to see if any of the turn signals were on, but not blinking? Also the side marker lights should light up if the turn signals aren't working, do they? Let me know. Next check the fuse box, it's on the driver side, under the dashboard. The fuses will be labeled, check the fuse for the turn signals.
Check to see if it"s blown. If it is, or you aren't sure, replace it with one of the same amperage (the # of amps is on the fuse). The fuses can just be pulled out to check them. If you still don't have working blinkers, go back to the fuse block under the dash. There are 2 round canister shaped units plugged into the fuse block. One of them is the turn signal flasher. They are about the diameter of a quarter, and a bit over an inch thick. If your emergency flashers are working, unplug one of the flashers. If they don't work after unplugging one, then you just unplugged the emergency flasher, so the other one is the turn signal flasher. Replace with a new one, identical to the old one. Let me know when you have followed all these instructions and what happens. countrycurt0

Aug 11, 2008 | 1999 Jeep Grand Cherokee

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Dodge Caravan Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...