Question about Cadillac Brougham
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ignition switch repair
The switch is on top of the steering column just behind the lower dash panel. Undo lower panel remove the steering column bolts upper and lower. Drop column and you will see it. The lock cylinder is a whole other story that will require special tools. Especially with a tilt and telescopic column.
Posted on Apr 14, 2009
you wont?? without the key you will not be able to remove the barrell.their are two headless bolts that shear off when its fitted ,if you can behind them and tap them around to slacken them with a centre punch then your lucky ??other than that remove the steering column and cut it off ,i take it the lock has jammed up ?? and will not turn .
Posted on Sep 20, 2009
Your famililer with this job or can have someone thats done it before show you as the security system is involved and mistakes will make the car never start again, without real intervention. A professioanl locksmith will save you lots of money by just not failing the first time. The lock cylinder has a key reader that electronally (reads) the key and if your key is missing a dealer or well equiped locksmith with reprogramming experience, is required. May dealers call in a locksmith or a roving mechanic that performs this function as it's a highly specialized proceture.
Posted on Dec 21, 2009
Testimonial: "Wow! Looks like I need to leave the repairs to the pros....."
remove ac vents with flat head screwdriver . thair should be a 7mm bolt in each vent holding tha dash pad on remove them. remove the trim going to head liner from the dash pad. use a 7mm to remove the bolts holding the cluser in place should be one each side and 3 across the back . disconnect the wiring harness and your done. also disconnect the negative batery cable when doing this
Posted on Apr 03, 2010
Hello: Carefully take a 1/4 inch flat bladed 6in. screwdriver and gently go under the switch plate (you might put a shop rag on top of the door panel under the screw driver to keep from damaging the panel, push in and pry up at the same time and the switch plate should pop up in the front then pull straight up and it should come up.
Posted on May 22, 2011
Tips for a great answer:
Jun 25, 2017 | 1993 Cadillac Eldorado
Oct 04, 2012 | 1983 Cadillac Eldorado
Aug 28, 2011 | 1994 Cadillac Eldorado
Feb 24, 2010 | 1990 Cadillac Eldorado
Nov 18, 2009 | 1976 Cadillac Eldorado
May 03, 2009 | 1994 Cadillac Eldorado
Apr 14, 2009 | 1999 Cadillac Eldorado
Nov 22, 2008 | 1994 Cadillac Eldorado
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: