Question about Mazda Cars & Trucks

Open Question

My T3500 is not starting.Te starter is turning.The diesel is pumping.I want to know the diesel heat system

Tell me about the heat diesel system to start fire in cylinder

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2009 dodge durango will not start

it could be that the theft system has something to do with it .it proably that the ignition system has a device in the module the locks the system up when the theft system has been activated you should have the dealer check the ignition system or the theft system check.

Posted on Feb 12, 2009

  • 1 Answer

SOURCE: Surf 1KZ-TE Diesel wont fire

I have the same problem. it just wont start one morning. can you please help me in case you have solved your problem already.

Posted on Apr 09, 2009

  • 2 Answers

SOURCE: Toyota Surf Diesel starting problem

Injectors could be blocked but i would go with an injector pump or fuel pump.

Posted on May 11, 2009

  • 434 Answers

SOURCE: Starting problem in a '97 dodge ram diesel

Could be the solenoid on the starter. Next time it doesn't start, hit the starter with a hammer or other hard object, then try to start it. If it starts, replace the starter before it leaves you stranded

Posted on Jun 23, 2009

  • 4088 Answers

SOURCE: My jeep has had trouble starting. It turns over

The check engine light should be on--rent a scanner and read the code(s). Pursue all clues. 'Pumping the gas' has no effect on a fuel injected engine--only older ones with a carburetor. Sounds like the starter solenoid may be clicking, but the starter motor is not turning. First thing to check is (using a voltmeter or test light) to see if power appears at the starter motor terminal when the key is turned (you need an assistant). If no power appears, the heavy contacts inside the solenoid are bad. I built-up a badly eroded contact in '96 Dodge Caravan starter solenoid with silver solder (from a welding supply) and it worked great! Next, push all fuses and relays firmly into their respective sockets--Jeeps tend to shake things loose if taken afield. Clean the battery connections with a special (but not expensive battery cleaner wire brush). Apply anti-corrosion grease (from an auto parts house) to both terminal and posts. Wash your hands afterwords to prevent strange holes from appearing in your clothes. Make sure the battery is fully charged. If you need to fiddle with the ignition switch to get it to start, the switch may need to be replaced. They do wear out! This should get you going, but there may be other problems--stay tuned!

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1990 4runner after putting rebuilt motor in starts but won't stay running. Any ideas?


new engine or starter motor????
stalls. which engine, exactly
all engines have unquick fueling and spark and lots more.
which one? of the 8. (even gas and diesel)

2.0 L 3Y I4
2.2 L 4Y I4
2.4 L 22R-E I4
3.0 L 3VZ-E V6
2.4 L 2L-TE turbodiesel I4
2.4 L 2L-TII turbodiesel I4
2.8 L 3L diesel I4
3.0 L 1KZ-T/TE turbodiesel I4

......................?

Dec 28, 2014 | 1990 Toyota 4Runner

2 Answers

My 98 chevy blazer just got a new fuel pump and filter. Wont start even with starter fluid into the throttle body. Any ideas?


If it's a gasoline engine, please check for sparks at the spark plug end. If it's a diesel, check pre-heating system. Starter fluid in the throttle body must be ignited by the spark plugs. For diesel, pre-heating is necessary to ignite the fuel.

Jul 20, 2014 | 1998 Chevrolet Blazer

1 Answer

1999 dodge ram 1500 won't start


Since you know the starter is good, now have the alternator and battery tested. If these are both good (if either or both are bad, obviously replace) then try replacing the starter relay; this will prevent a car from even turning over.

Also, check all starter fuses, iginition fuses and relays.

Q: Does the engine turn over?

Q: Does the engine start, then die, or just turn over?

Q: If it turns over, does it sound weak, or does it sound strong, like it's trying to start?

Q: Have you tired jump starting the truck? If not try this: if it starts and stays running, pull both battery terminals off. If the truck dies, replace the alternator. If it stays running, you may need to replace the battery. Look at the battery and see if there is a date sticker on it to indicate when the battery was purchased (or manufactured). (If diesel, have both batteries tested). If diesel, if jumpstarting from one battery doesn't work try the other one. Also, if diesel, make sure there is at least 1/4 tank of fuel as some diesels won't start if very low on fuel (pump does not reach very bottom of tank and will not syphin fuel in).

If gas/diesel, and it turns over, turn the key to the on position and have someone lean down at the back side of the truck (driverside) and listen for the fuel pump to engage. If no noise is heard, consider replacing the fuel pump. Inquire with an auto parts dealers as to whether or not this truck is equipped with a secondary fuel pump (usually located mid-way on the chassi).

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

Jul 19, 2010 | 1999 Dodge Ram

1 Answer

6.2 diesel will not bleed diesel


Make sure all lines are light when turning engine over.While turning engine over loosen the a line closes to pump or the fuel filter.You should get some fuel.Then continue on all lines working farther away.

May 02, 2010 | 1990 GMC C1500

1 Answer

I have a 2004 excursion diesel drove it all day stoped at a clients turned it off for 20 min came out and wont start the starter is going but its just not firing could it be a fuse I dont smell fuel but I...


Ok well the glow plugs on a diesel have nothing to do with the engine firing. All the glow plugs do is heat up the combusion chamber on cold starts. Diesel engines fire using high compression. An oxygen sensor won't cause the vehicle to not start and your diesel doesn't have one of those anyways. It could be a fuel related issue. (pump, line, pressure etc.) Have you it scanned for engine DTC's? But based on your knowledge of your diesel vehicle i'm going to suggest you take it to a shop.

Dec 19, 2009 | 2004 Ford Excursion

2 Answers

1995 dodge diesel will not start sometimes It just cicks .


Well diesels are known to be cold, I would chack out your fuel filter and fuel pump to see, if they are good or not.

Sep 13, 2009 | 1995 Dodge Ram 2500

1 Answer

After replacing fuel pump and filt truck wont start with started fuid


If this is a diesel you should not use starter fluid unless the glow plugs and glow plug controller is removed. If this is a diesel you most likely have air in the fuel system.When changing fuel filter on a diesel fill the filter container with clean diesel,screw the top of the fuel filter canister on open the bleed screw and turn the engine over until only clear fuel (no air bubbles)is bled from fuel system. Then you may have to turn loose the connector on the innjectors to bleed more air out of the fuel system.

Jun 15, 2009 | 1994 Chevrolet K1500

1 Answer

Will not start without spraying starter fluid for a second.


I would start by changing the fuel filter. The next area would be the O-rings if so equipped. If it starts better after a short use then you are getting air in the fuel lines overnight. Diesels are tempermental. The cranking speed of the starter is important and easily checked externally. If you have a mechanical fuel pump you are relying on cranking speed to prime the fuel system. The timer or timing wiring could prevent the glowplugs from heating up. Diesels rely on glowplugs to start, then compression to run. Its a lot to look at but I suggested the cheapest fixes first.

May 01, 2009 | Volkswagen Rabbit Cars & Trucks

1 Answer

Have a 85 f-250 diesel that won't start


7.3 diesel i assume?i had one years ago and the controller for the glow plugs went bad,couldnt heat up the fuel enough to ignite,or the injection pump went bad or is out of timing

Apr 25, 2009 | 1985 Ford F 250

2 Answers

Surf 1KZ-TE Diesel wont fire


I have the same problem. it just wont start one morning. can you please help me in case you have solved your problem already.

Jan 20, 2009 | 1995 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...