Question about 1997 Eagle Talon
Right side makes loud noise but stops when I turn right
Its it most likely the wheel bearing had this issue as well changed out wheel bearing and it was good to go
Posted on Oct 30, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you have the 1.8L engine, you can just replace the belt and you'll be fine.
if its the 2.0L(turbo or non-turbo) , you will have bent valves.
the head needs to be pulled and the valves replaced.
Posted on Aug 20, 2008
SOURCE: 1995 eagle talon wont start
You did not specify if its petrol or Diesel I am assuming it is diesel. It might be the glow plugs. Get them checked as you will need these to get it started. If its petrol its a different issue. It might be the ignition coil (no spark) coming to the distributor. Whichever the type of car make sure that there is fuel coming to the engine. In the case of diesel you should have a primer rubber fuel pump which you press in order to bring fuel to the engine.
Hope this was of help to you :)
Posted on Jan 07, 2009
Theres so many things that can cause a car not to start, can you smell petrol after trying to start? if so start with checking the spark side of things, if you dont smell gas find the fuel filter and follow the fuel hose to the fuel rail and squeeze the hose while some one turns the ignition on without starting. You should feel the hose expand when the ignition is turned to the on position, if it does then the fuel pump is doing its job. Like i said it could be alot of things but this is a good place to start. Is it multi coil set up?
Posted on Jan 11, 2009
who ever told you its the throw out bearing was wright. its an enclosed bearing so it does not run in any oil. if it only makes noise when it cold or sets for a while its common and dose not warrent taking it to a shop. all there going to tell you is you need a new clutch$$$$witch you do not need.
Posted on Jan 20, 2009
Tips for a great answer:
Dec 03, 2015 | 2008 Mitsubishi Lancer GTS CVT Sedan
Jun 23, 2012 | Hyundai Tiburon Cars & Trucks
Jan 16, 2011 | 1992 Eagle Talon
Apr 09, 2010 | 1997 Eagle Talon
Oct 17, 2009 | 1997 Eagle Talon
Oct 08, 2009 | 2000 Pontiac Grand Prix
Jul 31, 2009 | 1990 Eagle Talon
Jan 19, 2009 | 1995 Eagle Talon
Jan 04, 2009 | 1997 Eagle Talon
May 02, 2012 | 1997 Eagle Talon
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: