Question about Cars & Trucks

1 Answer

2001 Mazda 323 - after a new coil pack has been installed and the problem has been rectified how can I have the check-engine light turned off

Posted by on

1 Answer

You may have to change the spark plug behind the coil pack then the light should turn off .

Posted on Jul 14, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: check engine light is blinking

check the spark plug wires for dry rotting and check the order there in starting from the back of the motor left to right the order go's 1..2..3 and then the front left to right the order go's 4..5..6 also make sure that all the wires are plugged in the right order on the distributor also it could be your TCS or "TRACTION CONTROL SYSTEM" 

Posted on Dec 30, 2008

Papa Chan
  • 56 Answers

SOURCE: engine missing, particularly in idle, or dies when turning

The intake gaskets leaking would cause the engine to have a misfire. Get a can of Brake Clean and spray in around the intake manifold on the top of the engine while the engine is running. The engine idle will go up or down if there is a leak. Also try swapping the spark plug with another spark plug to see if the misfire moves to another cylinder. If it moves then you have a bad spark plug. I hope this helps.

Posted on Jan 04, 2009

  • 76 Answers

SOURCE: check engine light

go to your local auto parts store usually they will pull the codes from the car for free once you have the trouble code that is causing the check engine light to come on you can more accurately identify the problem. most shops charge around 90 dollars to check these codes.

Posted on Feb 05, 2009

  • 2039 Answers

SOURCE: check engine light due to MAP Sensor Mazda 2001 1.6L manual trans

the map sensor is on the passager side near the shock tower lot of time the plastic pipe that bring vacuum to the sensor break check it out pierre

Posted on Mar 04, 2009

  • 110 Answers

SOURCE: 2001 B3000 Mazda truck vibrating when idling and

have you had the catalytic converter checked at the local exhaust shop? try that first. is the truck a 4wd? time to start checking the ujoints. do a compression check on all cylinders and see if there is a major drop in that hole that is misfiring. let me know what you come up with.

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'89 Mazda 323 1.6 non-turbo, driving when the check engine light came on and vehicle died. Replaced fuel filter, getting good fuel pressure, cleaned out the dist cap, found the ignition wire to the dist...


check the ignition module, poss near the distributer for heatsink (contact) paste on the base to draw the heat away from the module. With the engine light coming on, it should have thrown a code possibly a bypass ignition or no pulse while cranking. If so refresh the ignition module.

Jun 08, 2010 | 1988 Mazda 323 Hatchback

1 Answer

The dashboard lights do not turn on with the


operate your instrument panel dimmer switch. If this does not rectify the problem replace dimmer switch

Mar 21, 2010 | 1992 Mazda 323

1 Answer

Mazda 323 1,6l,2002model.started jerking while driving and engine died.when cranking spark jump only once on coil for 1&4cyl,second coil no spark at all.bridged apropr.term in diagnostic socket but led...


i have mazda 323 2002 1.3 b3 engine manual transmission in cold engine will starting idling but did not raising 5 to 10 minits and in runnig it will be jerks

Mar 20, 2010 | 2000 Honda Accord

1 Answer

Mazda 323 Hatchback 1.8 DOHC 2000 model car


need to check the crank sensor and coil pack

Oct 06, 2009 | 2000 Mazda B-Series

1 Answer

1989 323 engine turns over but no spark


Theres more than one reason. The timing belt could have stripped and the dist. and the cam arent turning. Power to the coil could have failed ingtion fuse blown. Power to the engine control computer could have failed and the check engine light is'nt on with the key on but not running. Pulling codes with a scanner may find other problems like no crank sense or no ingtion power while cranking. Did the car stop running while driving or did'nt it just not start? The engine was cold when you last checked for spark?

Sep 04, 2009 | 1987 Mazda 323 4-Door

1 Answer

Check engine light due to MAP Sensor Mazda 2001 1.6L manual trans


the map sensor is on the passager side near the shock tower lot of time the plastic pipe that bring vacuum to the sensor break check it out pierre

Mar 03, 2009 | 2001 Mazda Protege

3 Answers

My 89 mazda 323 turns over but wont start


Last week my 323 89' Mazda stop working as I was driving it in middle of the street, I pushed to the side. it would not start, the starter sounded ok, but the car just didnt start, I checked the fuses, gas pump, and all seemed to be ok, finally with the help of a friend we found out that the ignition rotor at the distributor wasnt working we then replace it with a new one from autozone , is about 5 dollars, now it works just fine, big problem easy solution.

Victor

Dec 01, 2008 | 1989 Mazda 323

2 Answers

Engine will not start


could be your distributor contact point. if you do not have contact point, then the electronic part that replaces your contact point. some called it the electronic ignite r.

you should concentrate on the spark. you can check the presence of 12 volts in your coil while starting.

the primary windings of the coil are the one in the clips or screws. check be sure that you have positive 12 v on one wire and pulsating negative from the other terminal. the negative pulses are coming from the contact point.

tnx 4 using fixya,

drcool


Sep 06, 2008 | 1987 Mazda 323 4-Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...