Question about Dodge Magnum

1 Answer

Crank Pulley Will Not Turn 2007 Dodge Magnum

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Engine will not rotate?

Posted on Apr 20, 2013

  • 5 more comments 
  • Kendra Apr 20, 2013

    The Crank Pulley is the only one on the motor that will not rotate. The car oil light came on and car shut down. One man said the motor was locked but when you try to crank it- it sound like it wants to crank but that pulley is locked.

  • Mike Butler
    Mike Butler Apr 20, 2013

    If engine light came on and engine quit and will not turn over at that pulley, then you may have a big problem, sorry. Not a good situation. Was engine out of oil, or real low, is that why it quit? What's the mileage on that engine, and what size engine is it?

  • Mike Butler
    Mike Butler Apr 20, 2013

    How well has this engine been maintained, such as regular oil changes etc?

  • Kendra Apr 20, 2013

    The engine light on now. 170,000. 2.7 engine. Its at shop now just wanted to make sure he was telling me the right thing to do. Guess I will be replacing the motor

  • Kendra Apr 20, 2013

    He say he gonna take the pulley off to see if the crank broke. But computer reading crank lock

  • Mike Butler
    Mike Butler Apr 20, 2013

    As stated in other post, make sure he tries turning engine by hand at crank pulley, with starter off to confirm starter drive is not stuck engaged in flywheel. I just drove a 2.7 L Intrepid with 240,000 miles on it to the scrap yard, still running, just smoking a bit.

  • Kendra Apr 20, 2013

    OK I do know the crank pulley will not turn by hand as of now. But the starter is still on. Will tell him to try that.

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 32 Answers

SOURCE: tail lights dont come on when you turn on the

check all bulbs on the vehicle , if any bulbs are blown it will break the circuits causing malfunction of other lights. as well check all fuses .

Posted on Sep 26, 2009

  • 205 Answers

SOURCE: 2007 dodge magnum 2.7 v6 made a noise when i

the bendix may have gone bad. take the starter off and take it to an auto parts store such as auto zone they can test it.

Posted on Oct 15, 2009

emissionwiz
  • 76164 Answers

SOURCE: Fan relay position on dodge magnum 2007

The 3 (yes three) fan relays are located in the intergrated power module (IPM) which is the one under the hood.

Posted on Oct 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 dodge stratus r/t tensioner pulley and belt issue


ARE YOU POSITIVE THE SERP BELT IS NOT SLIPPING OFF THE CRANK PULLEY? I USE A STRIP OF DUCT TAPE TO HOLD IT ON THE PULLEY AS I FEED THE REST AROUND.

YOU SHOULD END UP WITH THE BELT TIGHT AND MUST THEN (USING A SERPENTINE IDLER PULLEY TOOL) RELEASE TENSION IN ORDER TO GET IT OVER THE CLOSEST, MOST CONVENIENT PULLEY...THEN RELEASE TOOL TENSION AND BELT SHOULD BE ON.
***FEEL FOR PROPER TENSION ON IDLER PULLEY (SERP BELT) IT MAY BE SHOT

Dec 20, 2013 | Cars & Trucks

1 Answer

How do I reset the computer in my dodge magnum 2007


Proper way is with code scanner with erase capability. Or you can try to unhook your battery and turn on the headlights, wait about 5 min. then reconnect battery. If you have stereo with code lock make sure to have code before doing.

Oct 17, 2013 | 2005 Dodge Magnum

1 Answer

Car wont crank up


Does the motor crank?

Jan 26, 2013 | 2008 Dodge Magnum

1 Answer

2007 magnum se 2.7 v6 wont turn over


Sounds like the engine is toast.
The warning light means the oil pressure has dropped below 10psi which can mean the engine is low on oil, or that something has happened to the oil pump or other components.
The crank bearings may be seized from lack of oil.
See if you can turn the crank by turning the alternator pulley.

Jan 26, 2013 | 2006 Dodge Magnum

1 Answer

Fan relay position on dodge magnum 2007


The 3 (yes three) fan relays are located in the intergrated power module (IPM) which is the one under the hood.

Oct 23, 2012 | Dodge Magnum Cars & Trucks

1 Answer

How do I change the serpantine belt on my dodge magnum (2007)


you need to take the tension off the belt by pressing on the automatic tensioner pulley. once the tension is off the belt can be removed. the new one goes on in reverse. The new one might seem very tight. Wrap the belt around the hardest pulley(s) first

Apr 19, 2010 | 2007 Dodge Magnum SRT8 Wagon

1 Answer

Change headlight bulb 2007 dodge magnum


Disconnect the negative battery cable. Turn the nut on the cable clamp counterclockwise to loosen it and then slide the clamp off the negative terminal.
  • Step 2 Open the hood and remove the electrical connector from the back of the headlight housing ballast.
  • Step 3 Turn the headlight counterclockwise and pull the headlight out of the housing. You may have to angle the bulb up at a 45 degree angle to clear the frame and headlight housing
  • Feb 18, 2010 | 2007 Dodge Magnum SRT8 Wagon

    1 Answer

    Tail lights dont come on when you turn on the light switch on 2007 dodge magnum but brake light work


    check all bulbs on the vehicle , if any bulbs are blown it will break the circuits causing malfunction of other lights. as well check all fuses .

    Sep 26, 2009 | 2006 Dodge Magnum

    1 Answer

    My 2005 dodge magnum was vadalized and has sugar in the tank. I drove it for a month before actually finding out that this is the reason why my car was was missing in the cylinders. Now my car has...


    DID YOU TRY TURNING ENGINE OVER WITH A POWER HANDLE AND SOCKET ON FRONT CRANK PULLEY?IF IT WON'T TURN,IT PROBABLY IS SEIZED..IF LIFTERS WERE TAPPING BEFORE THIS HAPPENED,IT SOUNDS LIKE SOMETHING INTERNALLY WAS HAPPENING OR OIL WAS CONTAMINATED..IF YOUR ENGINE IS SEIZED,YOU COULD GET A REPLACEMENT FROM A SALVAGE YARD..IS YOUR INSURANCE COMPANY INVOLVED?THEY MAY COVER YOUR LOSS..LET ME KNOW WHAT YOU FIND

    Jun 11, 2009 | 2005 Dodge Magnum

    1 Answer

    Trailer wiring a dodge magnum


    Get a trailer harness from the dealer, they just plug into the vehicles harness.

    May 30, 2008 | 2007 Dodge Magnum SRT8 Wagon

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    37 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...