Where do we find the diagnostic plug for the GWM Hover

Question edited for clarity and order.

Try 10 thou (0.0010)

https://www.google.com/search?q=2012+GWM+Hover+2.5+TDI+valve+clearance

..

very easy just go to reliable-stor e it has all manuals
there many other websites also but in this matter this website is too good

check you have power at the glow plugs . fit test light clamp to ground and probe the glow plug rail if no power check fuse if fuse is good check relay if relay is good take vehicle to your mosy trusted garage

First p;ace is to check door swtches. could be as simple as that

get the help from the company original service and repair manual and fix your problem http://toolsnyou.com/

gap should be 0.8mm

So, what the code is?

change trans fluid it is either old and dirty or the wrong type like 75-90 instead of 50 weight or ATF hope this helps

Hi everyone, I'm looking for diagram or manual photos of GWM 2008 Model with a GW2.8TC-2 diesel engine, for front timing cover marks of camshaft and diesel pump. I bought the vehicle with disassembled engine and the injector wires were tempered with. So I also need to know how to identify which one to plug on cylinder number 1 till 4th cylinder.
Any help will be appreciated. Email me the diagrams to [email protected] (Att : Piet)

Could be simple as spark plugs then next is ignition coils then check injector. Lots other things it could be but basics first. A service with new plugs and possibly filters is a good place to start.