What is an EGR TVSV and where is it located - 1990 Toyota Celica

Question edited for clarity.
Question moved to model category.

3.9L EGR valve location

Dakota Durango Forum https://www.dakota-durango.com > threads > 3-9l-egr-...
OBD-II trucks (96 and up) didn't have EGR any longer. If it did it would have a tube coming off the passenger side exhaust manafold and running to the EGR valve ...

2000 dodge dakota egr valve location

Fixya https://www.fixya.com > ... > Cars & Trucks > Dodge
4 hours ago - On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the ...

SOLVED: Where is egr valve on 2000 dodge durango - Fixya
Oct 26, 2008
Where is the EGR valve located on a dodge durango - Fixya
Feb 5, 2009
How to reach the EGR valve on a 2000 dodge durango - Fixya
Oct 15, 2015
Where is the location of the egr valve on the 4.7 liter engine
Nov 17, 2019
More results from www.fixya.com

Question edited for clarity, code is P-zero and not p-oh P0401.

The EGR valve is located in the engine compartment (underneath the hood).

Nissan Versa Exhaust Gas Recirculation/EGR Valve ...

Question edited to add maker.
Question moved to model category.

Places sell them and there are images on the images tab

https://www.google.com/search?q=2000+toyota+avalon+egr+vacuum+solenoid+location

But this says the 2000 Toyota Avalon doesn't have one!

Where's the vacuum solenoid located on a 2000 Toyota Avalon?

https://www.justanswer.com > toyota > be034-where-s-...
1 answer
This vehicle does not have an EGR Valve, so there is no VSV for EGR. The problem here will be a leak in the system or a faulty Vapor Pressure Sensor.

images for Where is E.G.R. located
How to Clean your EGR Valve (1.9 CDTi) - YouTube? 9:07https://www.youtube.com/watch?v=kDXKNLv4bF8Oct 14, 2012 - Uploaded by Absolute ModictsThe Vauxhall Astra 1.9 CDTi EGR Valve has real big issues with Blocking up, and Need cleaning regularly ...Replace an EGR Valve : Finding the EGR Valve - YouTube? 1:53https://www.youtube.com/watch?v=QCLfLv8wtlYApr 23, 2008 - Uploaded by expertvillageHow to properly locate your EGR valve. Learn how to remove and reconnect exhaust gas recirculation valves ...

Hi thanks for your question' The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

1. Remove electrical connector (5) at top of EGR valve solenoid.
2. Remove tube mounting bolt (1) at intake manifold.

1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
2. Remove gasket located between EGR tube flange and EGR valve assembly.
3. Remove two EGR valve mounting bolts (5).
4. Separate valve assembly (3) from engine.
5. Remove and discard metal gasket located between cylinder head and valve assembly.

INSTALLATION

1. Clean area at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
5. Position new gasket between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve and into intake manifold.
   1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
   2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

An EGR valve assembly located at the front of the intake manifold. The EGR valve is a poppet style valve (on/off only) and is controlled by an internal diaphragm.



Fig. EGR location and associated components-California diesel

Hope helps (remember to rate this and comment ).

The EGR Valve Location is typically housed on the intake manifold this schematic may help you
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008822d

The EGR pressure sensor is located within inches of the EGR valve. The exact location varies depending on the engine (2.5L, 3.0L or 4.0L). It is usually attached to the upper intake manifold with two small bolts.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

1. Remove electrical connector (5) at top of EGR valve solenoid.
2. Remove tube mounting bolt (1) at intake manifold.

1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
2. Remove gasket located between EGR tube flange and EGR valve assembly.
3. Remove two EGR valve mounting bolts (5).
4. Separate valve assembly (3) from engine.
5. Remove and discard metal gasket located between cylinder head and valve assembly.

INSTALLATION

1. Clean area at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
5. Position new gasket between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve and into intake manifold.
   1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
   2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications