Question about Cars & Trucks
Take the bulb out - pull the fuse that controls this light (if it doesn't control anything else that you need)
Posted on Apr 19, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the fuse box you are looking for is under the dash on the passenger side, you will need to remove the plstic kick plate then look up and a little to the right,you might have to remove three screws located along the rear edge of the panel, when you have the cover off in the upper left hand corner of the fuse box you are looking for a fuse that is marked [ SBM ] this fuse is for you interior lights, there should be extra fuses, in the second row second from the bottom and the third row second rfom the top, you'll know their spares if they pull out really easy and have no metal connectors inside the slots you just pulled them out of.
Posted on May 20, 2009
Order the exterior door handle AND the clip that attaches the rod to the exterior handle from your local dealership ( any part in the salvage yard will have at least as much wear as the one U are replacing ) Also order a can of touch up paint matching your car. After you have the parts and have painted the new exterior handle, roll down the window and remove the interior door panel. ( instructions have been posted at 'replace door lock buttom' ) Two nuts, one on each side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will need to reattach the rod to new handle ) To install new mechanism put the new clip on the rod, carefully place the gasket and the new handle in place and install nuts to secure. Test the door handle and make sure it works. Reinstall interior door panel.
Posted on Aug 24, 2009
The code PO742 indicates the torque converter clutch is stuck on.
The torque converter is what connects the engine to the transmission.
It engages and disengages according to signals from the pcm, to aid in
smooth shifting. There are a couple of things you can try. make sure trans. fluid is full, if thats ok check the 20 pin connector, located on left
side of car on top of transmission bell housing. Make sure there's no
corrosion or bent pins. If this clears the code your all set, if not you may
want to ask your mechanic and see what he/she recomends.
Hope this helps.
Posted on Jan 19, 2010
the actuator for the dome light is actually located inside the lock mechanism. Have you checked to make sure the dome light override button is in the out position?
Posted on Jul 17, 2010
Tips for a great answer:
Dec 01, 2014 | 1994 Buick Park Avenue
Mar 18, 2013 | Cars & Trucks
Jan 31, 2013 | 1999 Buick Park Avenue
Dec 06, 2012 | 1999 Buick Park Avenue
Feb 27, 2011 | 1999 Buick Park Avenue
Oct 29, 2009 | 1999 Buick Park Avenue
Oct 12, 2009 | 1992 Buick Park Avenue
Jul 19, 2009 | 1999 Buick Park Avenue
Nov 23, 2008 | 1997 Buick Park Avenue
30 people viewed this question
Usually answered in minutes!