Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to remove the dash but it is VERY simple to do.
Remove the fuseblock cover on the end of the dash on the passenger's side.
Once removed, remove the screw holding on the end of the dash.
Now, next to the glove box, to the right, remove the one screw on the bottom. Then remove this panel by pulling it out (it will now be held on by two clips at the top.)
Now, looking at the temperature control cover, remove the two screws from the bottom of this. Pull it off. It also is held on by two clips.
Now, below the steering wheel, remove the one screw from this panel (on the right). On the left there is a "plug" holding it in place, Pop out this plug. I think there are a couple of clips now holding this on at the top.
Now that you have all of that pulled out, pop the dash out. At worse, it is held in with clips.
Now that you have this out, there are four screws holding in the instrument panel. Take out these four screws. You will find one electrical cable connected to the cluster. Pop that off of the cluster and you now have the entire instrument cluster in your hands.
I've had to take mine out to figure out why my gear indicator/odomiter would not illuminate (Buick told me it was a light). I can see where this encased LED has a short (black mark). It is soldered onto the board. Looks like I have to purchase a repaired board.
I hope this helps.
Posted on Nov 03, 2008
Yes, there is a spear point style clip that is holding the assembly. Wrap a flat blade screwdriver with some masking tape (prevents paint scratches) and pry between the forward outboard corner of the brake light housing and the car body. You want to pry the assembly rearward.
Posted on May 31, 2009
Try looking here for general removal/replacement info... http://autorepair.about.com/library/a/1i/bl830i.htm
Posted on Jul 02, 2009
Posted on Jul 15, 2009
you will need
5/8 spark plug socket
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help
Posted on May 22, 2010
Tips for a great answer:
Dec 30, 2014 | 2005 Ford Freestar
Dec 29, 2014 | 2004 Honda Odyssey
Lets get started. Place the key in the ignition and turn as if to start your minivan - but do not actually start your Odyssey.
Jan 25, 2011 | 2005 Honda Odyssey
Nov 27, 2010 | 2005 Honda Odyssey
Nov 18, 2010 | 2000 Honda Odyssey
Nov 10, 2010 | 2006 Honda Odyssey
Dec 06, 2009 | 2002 Honda Odyssey
May 10, 2009 | 2005 Honda Odyssey
Sep 24, 2008 | 2001 Honda Odyssey
61 people viewed this question
Usually answered in minutes!