Question about Cars & Trucks

Open Question

Dash light fuse on kenworth w900 2000 model - Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2992 Answers

SOURCE: I have no blinkers or brake lights on my 2010 kenworth 900 deisal I have already replaced the blinker switch but nothing fuses under the dash are good also

Dangerous situation. Do you have any tail lights? running lights?
I would guess you have a power connection somewhere before it gets to either of the switches (including brake), a main relay, or separate relays for both brake and blinkers. Possibly a fuse that looks good is not. Volt-ohm meter is good at checking those things.

Posted on Apr 01, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuse position for the dash lights on a 2007 Kenworth t2000 ?


Might be a hard one to locate. i once was a kenworth tech. If all the other lights like in the heater and tach and switches work i would belive the fuse is fine. Pull the dash out and pull the bulb and socket form the speedo. Id be willing to bet the bulb is blown. If all the dash lights are out, just probe the tops of the fuses there is access for testing to find the blown one. Remember the fuses should have power on both sides. If the fuse has no power on either side that is a circuit that is only powered when required. Dash should be powered all the time.

Oct 05, 2017 | Cars & Trucks

1 Answer

I have a 91 t400 kenworth. Having trouble with running lights and dont know what relay to check and see if it is bad any help would be appreciated


the relays are under the kick panel under the dash on the driverside, the fuse is also a circuit breaker just push the reset button and they should work

Dec 09, 2016 | Cars & Trucks

1 Answer

2000 kenworth w900 head lights, dash lights, park lights, marker lights and tail lights not working. Any Ideas? I have already tested the switch panel ground and it is good.


check for a fuse or problem light switch or light control module as all the lights work through the switch or control module

Aug 02, 2016 | Cars & Trucks

1 Answer

1998 t2000 kenworth truck has no running lights or dash lights how to fix them


Fuse ?? this happens sometimes when the trailer has short some place in it , later models use a separation relay to power trailer lghts so that a short would only take out trailer lghts but in 98 they didn't a good shop mech could retrofit one in so that cant happen

Jul 28, 2016 | Cars & Trucks

1 Answer

Where is the dash fuse box on a 2004 kenworth c300 truck


I believe it should be inside of the cab behind the clutch pedal.

Feb 19, 2016 | Cars & Trucks

1 Answer

How do I reset my check engine light on my 1997 T600 Kenworth


2010 KW T800 How to reset engine check light ' TruckersReport.com ...

www.thetruckersreport.com > ... > Kenworth Forum
Nov 8, 2011 - Is there a way to reset Engine Check Light without going to dealer? ... Inmy case it was 3725. If I run with ... 2013 Kenworth Dash panel removal.Missing: 1997 ‎t600

DIY: Reset Check Engine Light without OBDII reader ...

? 3:31
https://www.youtube.com/watch?v=TvBcdjLkBhU
Jul 1, 2014 - Uploaded by Christian Macias
Learn how to reset your Check Engine Light (CEL) without using an OBD II 2 scanner / reader tool. ... Year ...

Nov 19, 2015 | Cars & Trucks

1 Answer

K104 kenworth. Heater/AC air only comes out of face vents. How can I make it come from floor or screen ect. Switch on dash is there and moves. Where's next to check.


check for a fuse for that control switch if it controls power
it may be a switch that moves valves to allow air to the vent actuators check for air line connections
talk with a kenworth service centre.

Jun 28, 2015 | Cars & Trucks

1 Answer

I have no blinkers or brake lights on my 2010 kenworth 900 deisal I have already replaced the blinker switch but nothing fuses under the dash are good also


Dangerous situation. Do you have any tail lights? running lights?
I would guess you have a power connection somewhere before it gets to either of the switches (including brake), a main relay, or separate relays for both brake and blinkers. Possibly a fuse that looks good is not. Volt-ohm meter is good at checking those things.

Apr 01, 2015 | Cars & Trucks

2 Answers

Need to fine the fuse for the left turn on a 1999 w900 kenworth


only has one fuse for turn signals . if both left turns do not work it is most likely in the turn signal switch.

Jan 29, 2013 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15314 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...