Question about 2003 Ford Explorer
When the radio in my 2003 explorer is scanning for a station, it skips by 2 digits (104.3 104.5 104.7...ETC). How can I get it to scan by one digit? or adjust using even numbers not odd numbers
1 -Check your head light switch and turn signal switch by taping them lightly - Common problem with fords to short signal light switch/head lights and they also have radio lights/clock lights control(lights dim for Radio/clock when you turn the lights on)
If you have checked all the fuses and switchs, possible that the light bulbs have burned out. Check with a local radio repair shop and they can remove the radio and install new bulbs.
Posted on Dec 02, 2008
To set the hour, press and hold the CLK control and press SEEK. (Use arrows to increase or decrease hours). To set the minutes, press and hold the CLK control and press TUNE and use arrows.
This should work unless your vehicle has a separate clock module.(Other than the digital radio display).
Posted on Mar 10, 2009
You have to have special ford radio tools. they look like two horse shoes. they clip into the two holes on either side of the radio and then you push outwards and pull on the clips at the same time and the radio slides right out. the tools are usually inexpensive and can probably be found at local auto parts store
Posted on Apr 14, 2009
SOURCE: radio display doesnt light up
I had the same problem too. Eventually ended up at www.shareamemory.com. You can either purchase instructions on how to repair it yourself or purchase a reconditioned board. I attempted to fix it myself and realized that I can't solder. So I purchased a board and have a had a brightly lit display for at least two years. I hope this works for you
Posted on Jun 01, 2009
Tips for a great answer:
Apr 24, 2015 | 2003 Ford Explorer
Aug 01, 2014 | 2003 Ford Explorer
Jul 26, 2012 | 2003 Ford Explorer
Jul 01, 2012 | 1998 Ford Explorer
Oct 29, 2009 | 1998 Ford Explorer
Oct 22, 2009 | 1994 Ford Tempo
Sep 30, 2009 | 2005 Ford Explorer
Mar 01, 2009 | 1999 Ford Explorer
Nov 23, 2008 | 1997 Audi A4
Dec 11, 2015 | 2003 Ford Explorer
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: