- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are many components in the cruise system. That system does not work with vacuum. The first thing I would check is the multi-function switch (the turn signal, wiper, cruise switch arm). On the back side of the turn signal arm is a plug that plugs into the steering column. Make sure that it is seated, or plugged in firmly. If you have had any work done recently on the steering column like turn signal switch replacement. That plug my have been disconnected and not reconnected completely. These multi-function switches do go bad. They are easy to replace though but a new one will cost over $100. Also the wire harness in the steering column do sometimes break off. The next thing I would check is the control unit. The cruise control unit is on the drivers side of the engine compartment right by the strut tower and the brake master cylinder. It has a cable attached to it going to the throttle body. Find the wire-harness plug on the back side of it and make sure that it is seated firmly in place. Considering the age of the vehicle My first guess is the multi-function switch. I have had to replace mine twice in my '96 cutlass, but I have also had to replace the wire harness in the steering column as well. It could be the switch on the brake pedal, or the vehicle speed sensor. I hope this gets you started in the right direction.