Question about 2001 Ford Escape

2 Answers

Radio Not Working

Pulled radio to connect XM direct connect to antena.  When radio was put back in, radio will not work.  Not getting power- not even clock on radio works. Test electrical lines on radio connector, car is sending power to radio, but radio will not power on.   Tried pulling fuse as well as disconencitng battery to see if it would re-set radio.  No Luck.

Posted by on

  • 2 more comments 
  • tarlawton Mar 12, 2009

    According to the owners manaul, there are two fuses- a 5 amp and a 10 amp that feed the radio.  Both are located on the fuse panel by the left foot area.  


    I pulled them separate from each other.  Worth trying them togethere or something else?

  • Chuck Martin
    Chuck Martin May 11, 2010

    I see you came back on chat but someone else got you before me.I am online now so if you don't get your answer try chat again and I'll try again to get you.

  • Chuck Martin
    Chuck Martin May 11, 2010

    which fuse did u pull?

  • Chuck Martin
    Chuck Martin May 11, 2010

    sorry I wasn't available at the time. If you still need the chat contact me back

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

There are 3 fuses in the interior fuse panel that feeds radio.
no. 11(10amp) is ignition switch power to the radio it comes into radio on the TN/LB wire.
no. 27 (10amp) is hot at all times and comes in on OG/LG wire.
no. 12 (5amp) is hot in run or accessory and comes in on YE/BK wire.
Check these with 12V test light at fuse and at radio connector.

Posted on Mar 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 473 Answers

Check with Ford to see if there is a reset because of losing power. You may have to have them do a reset code. I've had bad luck with XM Direct Connect; the older XM radios had a stronger FM modulator that didn't require you to pull the radio.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler 200 convertable how to put pictures on radio


SiriusXM Connect Vehicle Tuner - Shop - SiriusXM Radio

https://shop.siriusxm.com/xm/ctl10600/cp49759/.../c...

Sirius Satellite RadioMy Account. I'm a Subscriber ... Image 1 SiriusXM Connect Vehicle Tuner · Image 2 ... Add Satellite Radio to any SiriusXM-Ready™ car stereo receiver. Connect ...

[PDF]User Guide - SiriusXM

www.siriusxm.com/.../pdf/SkyDock_UserGuide.pdf

Sirius Satellite RadioThe XM SkyDock incorporates an XM Satellite Radio Tun- er . A special .... image to match the XM SkyDock's .... found on the My Account screen (in Settings), ... Button: Tap to tag the current song and add it to your tagged song list . For.

Dec 10, 2015 | 2011 Chrysler 200

1 Answer

Radio not working


there are 3 power sources to radio. if stock, if not stock more.
Radio power.
memory power
and dial lamp power. (dimmer)

why not use a voltmeter to find out why its dead.
even better the FSM shows the wires, the colors and the path.
making guessing go to zero.

when working electrics pull battery minus lug, like the FSM directs you.
and keys in pocket. causing load dumps can cause very expensive
electronics to fail. even the EFI, PCM.

Jun 04, 2013 | Honda Civic Cars & Trucks

1 Answer

It's not working any more and the radio dial just scans uninterropted all radio stations


the radio is not working? check the antena connections on back of radio and wire for damage

Apr 26, 2010 | 1997 Audi A4

1 Answer

How do i put the radio code in my 96 grand cherokee jeep


Jeep grand cherokee ltd, 1996 The radio is not working, when I switch the power on the antena motor makes a noise although the antena is always up, there is no sound from the radio what so ever, it says WAIT 2 1/2 hours but nothing happens, no tape radio cd, switch the radio off the antena makes a noise then the radio switches off.

Mar 14, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Radio not working in 05 Saturn Ion level 3


if the radio cant find a station when you push seek then this is an antena problen it may have simply pulled out the back of the radio do to vibration of the vehicle. this almost sounds impossible but it happens if this is not the case then you need to invest in a new radio

Jan 14, 2010 | 2005 Saturn ION

2 Answers

XM radio ''NOT READY'' message


I have had this problem at least a half-dozen times, and the simplest solution is to pull the 2 fuses labeled 'audio 1' and 'audio 2.' It resets the radio, but it will work for a while after that (until I have to do it again). Had the xm unit replaced 3 times, new antenna installed, replaced the antenna connection wire - it always dies within a month.

Sep 24, 2009 | 2008 Hyundai Veracruz

2 Answers

Radio dose not work and there isn't any fuse blown that i can find. do i need to get a new radio


Pull the radio and see if the antenna is plugged in the back of the unit.

Mar 29, 2009 | 2001 Plymouth Neon

1 Answer

2001 Grand Caravan Radio Stopped working


Chances are the radio has an internl issue and requires replacement. The EQ draws power and inputs from the radio. A radio exchange is an easy process if you decide to put the sme radio back into your vehicle. Contact me if you need direction.

Dec 06, 2008 | 2001 Dodge Caravan

1 Answer

Need to disconnect XM Tuner


the xm receiver is in the left rear quarter of van looks like between wheel well and rear of vehicle this is drivers side

Jul 17, 2008 | 2007 Honda Odyssey

1 Answer

XM Radio Fuse


sounds to me like you need to check the continuity to ground on the power line for the xm, you may have a power to ground short or a loose wire in the xm harness

Jul 09, 2008 | 2005 Chevrolet Equinox

Not finding what you are looking for?
2001 Ford Escape Logo

1,130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...