Question about 2006 Honda Accord
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There's another set of seals below the rocker arm assembly that will leak into the spark plug holes. This is a fairly big job to fix, maybe best to keep draining the oil out periodically. Bearings are probably fine.
May need an idle valve, but they can clog with carbon- I'd take it off and check that first. Cleaning that out just may solve that.
Posted on Nov 07, 2008
Perform a valve clearance inspection and adjust if necessary. Tight or sticking valves will cause a misfire or rough running concern. Note: Perform valve adjustment when the engine is stone cold. 4cyl: INT 0.26mm EXH: 0.30mm (V6 engine are hydraulic and no adjust necessary.) Also check for a sticking or stuck open EGR valve. For diagnostic purposes only: Remove the EGR valve. Place a business card over the EGR passage and bolt the EGR valve back on. This plugs the EGR ports and if the misfire goes away the EGR valve is partially stuck open and is defective.
Check for low fuel pressure. Check for low compression. Check cam timing. Check for a weak ignition coil. Also don't over look the possibility of worn or broken engine mounts which cause excessive engine movement and engine vibration. -hope this helps
Posted on Mar 05, 2010
Tips for a great answer:
Dec 16, 2015 | 2002 Honda Accord
Nov 02, 2014 | 2006 Honda Accord
Sep 24, 2014 | 2006 Honda Accord
Aug 31, 2014 | 2006 Honda Accord
Jul 02, 2012 | 2006 Honda Accord
Mar 27, 2011 | 2006 Honda Accord
Jul 11, 2009 | 1995 Honda Accord
Mar 17, 2009 | 1995 Honda Accord
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: