Question about Toyota Cars & Trucks

Open Question

Toyota highlander 2008 turned rotor minimum thickness

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

justuscc
  • 360 Answers

SOURCE: reset oil maintenance light in

  1. Set the "ENGINE START STOP" or engine switch OFF with the trip meter A reading shown.
  2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON.
Without multi-information display

  1. Continue to press and hold the button until the trip meter displays 000000.
With multi-information display

  1. Continue to press and hold the button until "COMPLETE" appears on the multi-information display.
there you go jimmy mark as fixya

Posted on Sep 26, 2008

lastech
  • 408 Answers

SOURCE: disc brake rotor wear limits

hi,depends your chassis number,if 210.055 your front disc thickness is 28mm,wear limit was 25.4mm,if 210.004,010,020,035,037 your disc is 25 mm. wear limit is 22.4mm,ty

Posted on Mar 24, 2009

  • 14036 Answers

SOURCE: what are the front brake rotor minimum thickness

MINIMUM THICKNESS FOR FRONT BRAKE ROTOR IS. 0.972

Posted on Jul 20, 2009

  • 4 Answers

SOURCE: 19" FACTORY TOYO TIRES SHREDDING

Toyo®, Exclusive Tire of 2008 Toyota Highlander Hybrid, Limited Grade
September 20, 2007– CYPRESS, CALIFORNIA – Toyo Tire (U.S.A.) Corporation announced today that the Toyo® Open Country® A20 is the exclusive tire of Toyota’s all-new 2008 Highlander Hybrid, Limited grade. In addition, the Open Country® A20 is original equipment on several other models of the 2008 Toyota Highlander, both hybrid and gas.

The Open Country A20 achieved exceptional low rolling resistance performance making it ideal for the hybrid model. The tires were also specifically designed to reduce noise and improve both wet and dry braking for added safety.

Based on the model and trim level of the Highlander, the Open Country A20 comes in two sizes: P245/65R17 105S and P245/55R19 103S.

Toyo manufactures and distributes a complete line of replacement tires for high performance cars, luxury vehicles, light trucks and SUVs as well as tires for commercial trucks, buses and off-road and construction applications.


I'm surprised if it's so good at braking that it has not ripped my entire tire tread off as technicians say the treat is separating well before its time!

Posted on Aug 09, 2009

  • 73 Answers

SOURCE: 2008 Toyota Highlander alarm goes off for no

You most likely have a bad hood latch switch you can unplug this switch until you get it repaired to stop the alarm from going off.
See Toyota TSB
T-SB-0331-08

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Minimum rotor thickness for 2008 mkx front and rear


Look on back side of rotor and minimum thickness should be shown.

Sep 29, 2016 | 2008 Lincoln MKX

1 Answer

WHAT IS THE MINIMUM THICKNESS OF THE FRONT BRAKE ROTORS BEFORE REPLACING


Discard Thickness (mm): 26 mm
2000 Toyota Camry 2.2L EFI DOHC 4cy
Auto parts stores have the specific data for your car

Dec 01, 2015 | 2000 Toyota Camry

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

1 Answer

Minimum thickness for buick lesabre front rotors


Hello there
From a kind chap on this page
http://buickforums.com/forums/threads/18395-Service-limits-for-brake-rotors

For a 2000 Buick LeSabre

FRONT BRAKE ROTORS:

Discard Thickness30.7 mm (1.209 in.)
Lateral Runout (New)0.06 mm (0.002 in.)
Minimum Thickness after Refinish31.08 mm (1.224 in.)
Rotor Diameter 15 inch Wheels (New)278.0 mm (10.9 in.)
Rotor Diameter 16 inch Wheels (New)303.0 mm (11.9 in.)
Rotor Thickness (New)32.20 mm (1.267 in.)
Thickness Variation (New)0.025 mm (0.001 in.)

Sep 15, 2014 | Buick LeSabre Cars & Trucks

1 Answer

Minimum rotor thickness


Call any auto parts store and they can look it up and tell you

Jul 15, 2014 | 2008 Chevrolet Silverado 1500 2WD

1 Answer

Caliper and bracket bolts torque


alldata.com

or the FSM.
its all there.

Dec 26, 2013 | 2008 Toyota Highlander

1 Answer

Avalanche minimum rotor thickness


Rear Brakes JC5/JH5 Utility Only
Rotor Discard Thickness* .............................. 28.50 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish ....... 29.0 mm (1.142 inch)
Rotor Thickness-new .................................... 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout ................. 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring ........................ 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation ........... 0.025 mm (0.001 inch)

Rear Brakes JH6
Rotor Discard Thickness * ............................. 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish ....... 28.0 mm (1.102 inch)
Rotor Thickness-new .................................... 29.0 mm (1.141 inch)
Rotor Maximum Allowable Lateral Runout ................. 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring ........................ 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation ........... 0.025 mm (0.001 inch)

Nov 12, 2013 | 2002 Chevrolet Avalanche

1 Answer

Minimum thickness for a 1997 toyota avalon front rotors


lordFord's answer was arrogant and absolutely useless. Brake rotor thickness specifications are dependent upon the Year/Make/Model of the vehicle, it has nothing to do with your "state/province" or "common sense." Most brake rotors have the minimum thickness spec. stamped on the rotor itself. The service department of the dealership for whatever brand of vehicle you have, will be able to provide the spec. to you as well. A visual inspection may point to obvious signs such as scoring, cracks or pitting, and a vibration when applying the brakes, could be a warped rotor.

Jul 27, 2012 | 2003 Oldsmobile Alero

1 Answer

2003 sierra rear brake rotors


there is many kind of brake system of ur truck here i will send u everything about the brake and i hope its help

Rear Brakes JC3

Rotor Discard Thickness* 18.50 mm/0.728 in Rotor Minimum Allowable Thickness After Refinish 19.0 mm/0.748 in Rotor Thickness (new) 20.0 mm/0.787 in Rotor Maximum Allowable Lateral Runout 0.05 mm/0.002 in Rotor Maximum Allowable Scoring 1.50 mm/0.059 in Rotor Maximum Allowable Thickness Variation 0.025 mm/0.001 in
Rear Brakes JC4

Rotor Discard Thickness* 28.50 mm/1.122 in Rotor Minimum Allowable Thickness After Refinish 29.0 mm/1.142 in Rotor Thickness (new) 30.0 mm/1.181 in Rotor Maximum Allowable Lateral Runout 0.05 mm/0.002 in Rotor Maximum Allowable Scoring1 .50 mm/0.059 in Rotor Maximum Allowable Thickness Variation 0.025 mm/0.001 in
Rear Brakes JH2

Rotor Discard Thickness* 28.50 mm/1.122 in Rotor Minimum Allowable Thickness After Refinish 29.0 mm/1.142 in Rotor Thickness (new) 30.0 mm/1.181 in Rotor Maximum Allowable Lateral Runout 0.05 mm/0.002 in Rotor Maximum Allowable Scoring 1.50 mm/0.059 in Rotor Maximum Allowable Thickness Variation 0.025 mm/0.001 in
Rear Brakes JH6

Rotor Discard Thickness* 27.50 mm/1.082 in Rotor Minimum Allowable Thickness After Refinish 28.0 mm/1.102 in Rotor Thickness (new) 29.0 mm/1.141 in Rotor Maximum Allowable Lateral Runout 0.05 mm/0.002 in Rotor Maximum Allowable Scoring 1.50 mm/0.059 in Rotor Maximum Allowable Thickness Variation 0.025 mm/0.001 in
Rear Brakes JH7

Rotor Discard Thickness* 28.5 mm/1.122 in Rotor Minimum Allowable Thickness After Refinish 29.0 mm/1.142 in Rotor Thickness (new) 30.0 mm/1.181 in Rotor Maximum Allowable Lateral Runout 0.05 mm/0.002 in Rotor Maximum Allowable Scoring 1.50 mm/0.059 in Rotor Maximum Allowable Thickness Variation 0.025 mm/0.001 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this Specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications.

Mar 15, 2009 | 2003 GMC Sierra 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...