Question about Nissan Micra

Open Question

Nissan micra emissions warning light

Co2 sensor replaced 4 times light still on

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Emissions warning light on Renault Grand Scenic II, 2004 1.5 DCi

i have a renult scinic 2004 1400cc emissions warning light on running uneeven and loss of power can this be sorted out what is it

Posted on Feb 07, 2009

roy7777
  • 109 Answers

SOURCE: volvo 850 t5 emission warning light on (green triangle)

it is probally due to an evap -code and never refuel with engine running go to a parts store and get the code and erase code and go to have car inspected right away and put a bottle of emission reducer in tank WITH 1/8 OF FUEL and then put it on machine and you should be ok

Posted on May 18, 2009

  • 6 Answers

SOURCE: NISSAN Micra 1.2 Acenta+

Hi there, should be to the right of the catch just before the right indicator grill, slide it left and pull open bonnet.

Posted on Jun 07, 2009

  • 5 Answers

SOURCE: My nissan micra 2003, malfunction indicator light

OH YES !!!! u have to get ur car computer scanned right away. Theres surely a problem on the way, and before it gets worse, get it scanned and u will easily get to know what needs to be changed. So instead of changing 3-4 things when its gets worse, its better to change only the thing which is required right now.

DO IT RIGHT AWAY !!!

Posted on Aug 04, 2009

lindsay836
  • 677 Answers

SOURCE: i have nissan micra K11 with light flasing code

From what I understand it is the Nissan Anti-theft System (NATS) correct ?
The other numbers you show do not correspond to any codes I can find.
The reason the car is not starting is because the Nissan keys MUST be programmed for that car.
Make sure you did not have a new key made and that if you did you have to program it.
Your owners manual will tell you how.
Please elt me know what you find.

Posted on Feb 08, 2010

Testimonial: "thanks for your help, the car need key porgramer."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2005 NISSAN MICRA ESSENZA CAR,,,,, when


this one will work. http://www.ebay.co.uk/itm/2003-Nissan-Micra-Electronic-Accelerator-Pedal-/321195223272?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ac8ba28e8 dont know if you are in the uk

Oct 07, 2013 | Nissan Micra Cars & Trucks

1 Answer

Speed indicator warning light comes on, why ?


that is telling you there is a problem with the speed sensor. is there any other warning lights

Feb 01, 2013 | 2005 Nissan Micra Acenta

1 Answer

How do i reset central locking on a micra 04 reg


Try the following:

"KEY FOB PROGRAMMING
NISSAN
SYSTEM DESCRIPTION
The Central Door locking is controlled by the Multi-Remote Control system which controls
the door locking, door super locking and hazard reminder. When the doors are locked and
unlocked the unit flashes the hazard lights once for lock and twice for unlock.
A maximum of four remote controls are allowed to be programmed.
ALMERA
ALMERA TINO
PRIMERA
MAXIMA
MICRA
SERENA
VANETTE CARGO
TERANO II
Ensure all the doors have been unlocked, either by using a good transponder key or remote
control plip key.
Procedure
1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds.
2. Then turn ignition switch to OFF position. Leave key in ignition switch.
3. After 2 seconds, the system will enter programming mode and will flash the warning
lights twice.
4. Press and HOLD the unlock button on the Plip.
5. While pressing the unlock button, press the lock button 3 times.
6. Release the unlock button.
7. The warning lights will flash once to indicate successful programming.
8. Repeat procedure 4 to 7 for up to 4 plip key?s.
9. When completed turn ignition ON, and the warning lights will flash 2 times.
10. Remove key, and check all plip key?s for operation.
NOTE : The programming mode will stop when either the ignition is switch ON, 4 plip keys
have been programmed or no input signal either from the switch or plip keys has been received
for 120 seconds."

Mar 12, 2012 | Nissan Cars & Trucks

1 Answer

My 04 Nissan Tekna Micra (1.2) came up with Crankshaft position sensor warning, I have had this replaced but the light and warning is showing on the comp dash, but car seems to be running fine now, do I...


If you replaced the part, you just need the trouble code cleared. Only a matter of plugging in a scanner and erasing trouble code. Some vehicles reset if you leave the battery unhooked for 10 minutes, so I am not sure if that will work for you.

Mar 07, 2011 | 2003 Nissan Altima

1 Answer

Service engine light


service engine light on Nissan will not damage the car in any manner, however you gas mileage may change slightly. Service engine light can be numerous of issue. Fist I would change the Co2 sensor, 99% that will be the main issue, most people don't realize that unit need to be replace every 50-75k miles. if that does not solve the issue than take it to the dealership and have them plug it into their computer and it will spit out a code so mechanic can narrow drown on what need replacing. Running bad gas or running low octane can also cause the light to come on. Before you change Co2 sensor, go to Mobile, Shells, Speedway, gas stations and put in 93 or highest octane gas and go to Automotive store and pick up a STP fuel injectors cleaner, mix it with full tank of gas and run it til next refill and see if that light goes off, if not than change Co2 sensor. I believe that truck has 2 sensor if it a V6. the sensor located on the exhaust pipe before catalyst converter. its easy to fix and replace if you have the tools. if you don't know where the sensor looks like or located on the car, just get the new parts and look compare the old to the new. they run somewhere around 35-40 bucks each. Co2 sensor measure amount of burned gas telling the computer if its running rich or lean, if the sensor goes bad the computer get trip and the light comes on. good luck!!

Nov 24, 2010 | 2002 Nissan Xterra

4 Answers

Nissan micra k12. not idling properly, low power, not staring all the time. continuous problem. replaced throttle with 2nd hand part. better for a while. now car wont start, if it does it hunting,(sound...


HI, I GOT NISSAN MICRA 1.2 SE 2005 PLATE ONLY DONE 59000 MILES. MISSING! I HAVE CHANGED COIL PACKS, CAMSHAFT SENSOR, TIMMING CHAIN, STILL THE SAME PROBLEM. I HAVE ALREADY SPENT 1000.00 POUNDS. IS THERE ANYONE WITH SAME PROBLEM?

Jan 29, 2010 | Nissan Micra Cars & Trucks

2 Answers

I have yellow engine warning light on 2003 nissan almera tino.had cam sensor replaced;still comes on.any reported simlar problems


I have not used my nissan micra 2003 for 7 months it has been stored in the garage but the engine has been started on a weekly basis but today the warning engine light has come on, the car has only done 2300 miles, SHOULD I BE WORRIED or is it because the battery has been disconnected in between starting the engine so it didnt drain the battery while it was standing in the garage unused, this has happened the day before i take it for a mot.....

Jan 17, 2010 | Nissan Almera Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...