Question about 1993 Geo Tracker
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
THERE IS A SWITCH UNDERNEATH THE STEERING COLUMN THAT WILL CORRECT THIS PROBLEM. I BOUGHT MY 1994 GEO TRACKER 4X4 BRAND NEW. IT TOOK ME SEVERAL SERVICE APPOINTMENTS FROM MY DEALER BEFORE I GOT THIS INFORMATION FROM MY MECHANIC.
Posted on Feb 01, 2009
i1m sorry to say that wheel bearings are not set to a torque specification, when you have repacked the bearings [ inner and outer ] ,reassembled it ,take the nut up until thewheel starts to drag and not turn very far when you try to spin it spin it backward and forward several times,grab the top of the wheel and try to push it in and out,if you getany movement at all tighten the nut a couple of castilations. do it all over again, spinthe wheel a few times and then try for the crossways movement again, if there is no movement ,you are very close to being right....................now comes the experience bit , iwould take it one more castilation of the nut because i know the feel that is need ed,,without that i suggest you put the pin in where you ereput the cap on and go for a 5 minute drive . whenyou get back ,jack it up and thespinning of the wheel again and try for the top crossways movement ,if there is any tighten thenut 2 castilations, and provided that when you try to spin the wheel by hand with a reasonably strong push the wheel should trael about 6 inches at least after your hand leaves it ,it is now a close as you are going to get itput it all to gether and for the next day or so put yor hand on the grease cap after you have driven anydistance, and you will feel it is warm but you should be able tohold your hand on the grease cap. there you have it ,any questions come back."youdoit"
Posted on Nov 06, 2009
1996 Geo Tracker Car Radio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: White
Car Radio Accessory Switched 12v+ Wire: White/Black
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Red/Yellow
Car Stereo Dimmer Wire: Red/Green
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): Black/Blue
Right Front Speaker Positive Wire (+): Blue
Right Front Speaker Negative Wire (-): White/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Light Green
Left Rear Speaker Negative Wire (-): Light Green/Black
Right Rear Speaker Positive Wire (+): Gray
Right Rear Speaker Negative Wire (-): Gray/Black
Posted on Nov 22, 2009
Click on the following free, direct Link. It has the Timing Belt Diagrams, including Marks and Instructional Diagrams.
Let me know if this helped...
Posted on Apr 08, 2010
A 1993 Tracker will have OBD1 technology. Just unplug the battery for 5minutes and plug it back in. If the light persists You will have to find out and repair the problem that your cars computer believes it has.
Posted on May 12, 2010
Tips for a great answer:
Dec 09, 2015 | 1993 Geo Tracker
Apr 09, 2015 | 1993 Geo Tracker
Aug 24, 2014 | 1993 Geo Tracker
Jul 18, 2014 | 1992 Geo Tracker
Apr 06, 2013 | 1993 Geo Tracker
Nov 27, 2012 | 1996 Geo Tracker 2 Door
Jul 16, 2010 | 1993 Geo Tracker
Feb 14, 2010 | 1993 Geo Tracker
May 20, 2008 | 1994 Geo Tracker
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: