Question about 2004 GMC Sierra 1500 Crew Cab

Open Question

2004 GMC Sierra 1500 dash light for towing does not come on when button pushed at end of gear shift to tell if towing.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 gmc 4x4 it will not shift into 3rd gear or overdrive


There is a 3/4 clutch pack in the trans that when it fails you loose those two gears. There is nothing you can do other than to pull the trans and do an overhaul . I started rebuilding those back in 1982 when they first came out in the old 700r4. Even though the new 4L60E is all computer controlled, it is still doing the same thing.

If you tow with it and do not push the tow/haul button it will burn the clutches, especially if you are towing a large heavy load.

Sorry for the bad news

Apr 09, 2010 | 2000 GMC New Sierra 1500

1 Answer

2004 gmc dual ac, driver side vents shift from ac


bad blend door actuator maybe there is way to press the buttons on controller to make doors recenter they call it

Mar 22, 2010 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

2004 gmc 1500 sierra heater control stuck on


Defrost is the default position. Is the control a autyomatic temperture control unit? ( you set the temp and select automatic) if it is the system is completely electronic. You push the buttons and the control still says defrost or can you select something else and the control shows it but it just keeps coming out the defrost? If the control changes and the air comes out the defrost anyway and the cheack engine light isn't on, then the problem can be blown fuses or an air door actoater not working. Does the dash emit a clicking sound? if it does with the covers off the bottom of the dash reach around touching the different pieces till you touch the idem that is clicking. this is an acutor motor, or blend door motor. they have gears in them that wear out and break the motors aren't repairable and you just replace the ofending motor. the door that is moves can be stuck. and may have to be freed up with blaster, WD40, or other rust buster till it moves easy. maybe after getting the door to move smoothly you can get the old motor to move the door wiithout having to install a new one.

Jan 06, 2010 | 2000 GMC Sierra

1 Answer

The four drive servicer light came on the dash..It won't go into 4 wheel high...


sounds like you need to have the push button on the fly system checked out, might need replacement.

Dec 09, 2009 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

Rear-end grinding noise in 1993 GMC Sierra 1500


your description sounds like the gears inside the the same differential you just replaced.

Oct 13, 2009 | 1993 GMC Sierra K1500

2 Answers

When the Tow Pkg is 'ON' how does it show it is 'ON'? Is there a light??? Also, what is the maximum towing capacity for the 1500 4x4?


on your dash console above your gauge`s where your check engine light and etc. it will say tow mode ON or tow mode OFF when you push the button on the end of the gear sellector .

Sep 26, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Four wheel drive not working properly


while in drive, engage the 4wd, then shift into neutral for 2 or 3 seconds, then shift back into drive. it works for my '98 ram.

Jan 10, 2009 | 2002 GMC Sierra 1500

2 Answers

2002 GMC Sierra 1500 rear brakes


Sounds like a rear end ratio problem ECM malfunction

Jul 08, 2008 | 2002 GMC Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...