Question about Cars & Trucks

Open Question

CLIPS FOR A THROWOUT BARRON - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just replaced a clutch in a Johndeere 4230 and it hard to shift it into gear. I was wondering if there were some way to adjust the clutch or do you have a solution. Thanks


Hi Tim:
Sounds like a fun project.
I'd double check:
- the position of the forks in the throwout bearing,
- confirm that the throwout bearing is installed facing the right way,
- confirm that the clutch plate is facing the right way
- check the pivot on the throwout lever, and
- check the clutch pedal linkages.
- Finally, (or first if all the preceding is too basic, Check the adjustment in the linkage to achieve about 1 inch free pedal travel.
My apologies for including what may seem exceedingly obvious items.
Here is a link to a bunch of youtube video clips that may assist you.
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=John+deere+4230+youtube+replace+clutch

Hope this helps.

Mar 31, 2016 | Cars & Trucks

1 Answer

Does hydraulic slave cylinder bearing need greasing?


Hi Sheila:
The clutch slave cylinder pushes against a throwout arm
The throwout arm is a lever and it pushes against the throwout bearing which thenpresses against the clutch plate and dis-engages the clutch.
Throwout bearings are typically sealed units that last until they fail, at which time they get replaced.
You should not have to worry about greasing it.
Hope this helps.
Cheers.

Jan 27, 2016 | 1996 Ford F150 Regular Cab

1 Answer

I have a Chevy short box 1989 and I just replaced my rear wheel Barron an when I take a left turn it still hums ?


Most likely you have chewed up spider gears , the 4 small gears in the carrier. Remove diff cover , inspect gears for pitting or grooved slits.

Feb 26, 2014 | Cars & Trucks

1 Answer

Throwout beardin no good...can it be replaced only or whold clutch


Yes, the throwout bearing can be replaced individually. However, it still requires removal of the transmission to replace it. For the low cost of a clutch kit (which includes a throwout bearing) why would you want to go through all that work and not replace the clutch also?

Mar 18, 2012 | Isuzu Cars & Trucks

1 Answer

How to install power steering pump on a 1994 chrystler le-barron


drop the pully splash gard on passenger side. and you should be able to get to it from under the car with a line wrench.

Oct 04, 2011 | 1994 Chrysler LeBaron

2 Answers

I need instructions on replacing the clutch in a '94 Chevy Blazer 4x4, 350 engine. Specifically the pilot bearing, throwout bearing.


The pilot bearing is pressed into the flywheel and you need a pilot bearing/bushing puller. Some A/P stores will rent it to you for free (deposit). the throwout bearing is held onto the clutch fork normally by clips. Sometimes you have to take the "fork" out to get the bearing off.

Make sure to note how "deep' the pilot bearing/bushing is so that when you install the new one it is set at the right depth.

Jan 01, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

97 kia sephia axel


if your talking about the main axle bolt then you can buy a breaker bar and a large socket but you still have to almost stand on the breaker bar or you can buy an impact wrench cheap at any pawn shop.

Dec 09, 2009 | 1997 Kia Sephia

1 Answer

Need help on replacing a wheel barron on a 2001 olds alero


Can't be done at home...you need a mechanic - and a junk yard - this time :o(

Jun 14, 2009 | 2001 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...