Question about 1996 Cadillac Eldorado
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
i would say that you have a bad fuel pump or if you have a carb on it the float inside the carb is stuck check these and i'm sure you will find it's one of these.
Posted on Sep 06, 2008
same prob i replaced air idle control and cleaned out intake valve or altenator is not giving right volts and fuel pump on start up isnt giving right amount of gas cadillacs need fuel pump to be correct or whole engine will not run right
Posted on Dec 26, 2008
My son has this same car with the same problem. So far after tune up and other process of illimination, the problem points to the catalytic converter. If it is clogged you will get this problem with the rough idle and stalling. Look under the car at night after running it and see if the catalytic glows red. If so you need a new one. Hope this helps.
Posted on Mar 20, 2009
The Idle Air Control (IAC) valve is clogged. This part feeds air to the engine at start-up and idle when the throttle bodies are closed. I removed the throttle body assembly from my 2001 RX300 and separated it from the IAC. After a good cleaning with throttle body cleaner the IAC was good as new. I later decided to replace it during routine maintenance. You can pick up a brand new IAC on eBay (genuine Lexus/Toyota part). The dealer will want upwards of $400.00 for a 45 minute job (all you need are basis hand tools).
Posted on Mar 23, 2009
Tips for a great answer:
Jan 27, 2017 | 1996 Cadillac Eldorado
Dec 28, 2015 | Dodge Cars & Trucks
Mar 04, 2014 | 1995 Dodge Intrepid
Sep 21, 2012 | 1994 Cadillac Eldorado
Mar 01, 2009 | 1996 Cadillac Eldorado
Oct 05, 2008 | 1994 Cadillac Eldorado
Sep 30, 2008 | 1995 Cadillac Eldorado
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: