Question about Toyota Hilux
When lights on cruise control cant be engaged OR when cruise control engaged, when lights turned on cruise control drops out
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
here are two switches that are the usual causes of the cruise kicking
out. they are both under the dash. One is the switch for the brake
lamps (stop light switch). the other is for the clutch if you have a
if you follow the brake pedal up under the dash you'll find two switches at the top of the pedal. (it may be one switch but I think its two). the top one would be for the cruise control. if the switch is loose it will cause the cruise control to think you're stepping on the brake and that will disengage the cruise control
same with the clutch pedal if you have a manual transmission; if the switch is loose it will indicate you are pushing the clutch pedal in and cause the cruise to kick out
other than that you'll have to check all of the connectors. If it does engage then the fuses and actuators should be good and it would be a loose connector or switch that's kicking it out
also, i assume your speedometer works; if its not then that's your problem as the cruise won't engage under 30 mph
Posted on Jun 25, 2008
look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger
Posted on May 21, 2009
If you can please look under the hood and find the Air filter, and follow that all the way to a round metal part (Throttle body) If you can see it there will be a coil,and on that coid will extrude a curved plate with a cable(throttle cable) attached to it running all the way back inward toward the back of the engine, and next to that there should be a second cable (crusie control cable). This cable is pulled on when you engage the cruise control, by a black box next to the fuse box.
If the Cruise control cable is near by try to reattach it and if it is damaged then have your dealership or some one mechanically inclinded to replace the tip ( if plastic) or replace the cable.
If that didnt help please get back to me
Posted on Jul 16, 2009
I had same problem (cruise control/dashboard lights) for the past month with my 2000 Elantra. Replace the tail lights bulbs - my problem was caused by a problem with the double filament within the bulb. Essententially, there was a short when I turned on the lights or hit the brakes.
I did this last night and everything is working properly now.
Posted on Sep 18, 2009
If the cruise lamp comes on and the cruise does not set i would advise inspecting the cruise cable and make certain it is not broken, if ok the the servo has likely failed.
Posted on May 29, 2010
Tips for a great answer:
Sep 30, 2015 | Nissan Cars & Trucks
Sep 09, 2014 | 1997 Mazda 626
Aug 22, 2014 | Toyota 4Runner Cars & Trucks
Mar 07, 2014 | 2007 GMC Yukon
Nov 12, 2012 | 2007 GMC Sierra 1500
May 18, 2010 | 2007 Honda Odyssey
Apr 12, 2010 | 2007 Chevrolet Corvette Convertible
Mar 06, 2010 | 2007 Saturn Aura XR Sedan
Jun 20, 2008 | 2004 Chevrolet Cavalier
338 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: