Question about Ford F 150

Open Question

Where is the freeze plug locations on ford f-150 v8?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
samson-1
  • 153 Answers

SOURCE: freeze plugs ford econoline 150

The freeze plugs can be fixed with the engine in the veicle. There are some rubber plugs available that have a bolt thru the middle. Pry out failed plug, push in rubber replacement, tighten bolt to expand rubber. Fixed.

Posted on Oct 25, 2008

Ad
  • 13 Answers

SOURCE: were is the fuel pump relay on 1992 ford F-150 ?

If i am not mistaken, it is in the relay box on the drivers side inner fender well under the hood

Posted on Jan 05, 2009

emissionwiz
  • 76682 Answers

SOURCE: location of cylinder 4

here is the cylinder layout diagram for thios engine.
5c0a2cc.gif

Posted on Apr 15, 2009

moparownr
  • 667 Answers

SOURCE: My 1984 Ford F-150 V8 302 choke is not working?

Your choke should have a spring at the bottom under a little cover with a rod coming up and connecting to the butterfly for the choke. Usually this get a little corroded and sticks, you need to clean the pieces so that they rotate freely and the rod will move up and down. It is adjusted on some models by bending the rod to make it longer or shorter. When you push down the gas pedal for the first time in the morning it should set the choke, test this by opening the throttle while its cold out, once the throttle is opened the choke should close, once the engine is running there is a vacuum operated linkage that should pull it back some, until the engine is warm. Again if this worked before, its probably dirty so a good cleaning is in order. Hope this helps, let me know

Posted on Dec 10, 2009

  • 180 Answers

SOURCE: 1998 Ford Truck F 150 2WD Pickup V8-4.6L SOHC VIN

this is not a job for the faint of heart!! you have to remove the complete dash! the heater box is located hehind the radio !in the middle of the dash ! theres no way around!!!

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 F-150 Ford truck 4 4 and straight see where are my freeze plugs located at


Freeze plugs are located on a straight 6 on left side and between flywheel and block

Mar 09, 2017 | Ford F-150 Cars & Trucks

1 Answer

Got a leak at the back of the engine after a freeze on a 1996 Ford f-150 v8 where are the freeze plugs back there


You have to remove the transmission to get to the freeze plugs on the back of the engine. Remove transmission and flywheel and you will see the freeze plug. Replace the plugs in the side of the block as well if you replace them.

Dec 09, 2014 | Cars & Trucks

3 Answers

Firing order diagram for 2008 f 150 4.6 v8


1 - 3 - 7 - 2 - 6 - 5 - 4 - 8

It has the Coil On Plug ( C.O.P. ) ignition system with ( 8 ) individual coils

The engine cylinder locations are numbered :

firewall

4 - 8

3 - 7

2 - 6

1 - 5

front of Ford F-150 ( V8 )

Jun 27, 2014 | 1984 Buick Regal

1 Answer

How do i locate the spark plugs on a 2004 E 150? 4.6l v8?


Follow the plug wires from the distributer to the spark plugs. VERY tight on vans, typically takes several tools to get them all. Be very careful not to crack new plugs on install... Need to be a small person, with small hands to do this job...

Aug 21, 2010 | 2003 Ford E150

1 Answer

1998 Ford Truck F 150 2WD Pickup V8-4.6L SOHC VIN


this is not a job for the faint of heart!! you have to remove the complete dash! the heater box is located hehind the radio !in the middle of the dash ! theres no way around!!!

Mar 20, 2010 | 1998 Ford F150 Regular Cab

1 Answer

2000 f-150 4x4 5.4 v8 loud pop on top of engine when running


YOU HAVE NO SPARK WIRES YOU HAVE COILS ON PLUGS.YOU HAVE TO REMOVE COIL FIRST TO REMOVE SPARK PLUG.I WOULD CHECK SPARK PLUGS AND FUEL INJECTOR S+ SEALS IF YOU SMELL FUEL VAPORS.

Mar 07, 2010 | 2000 Ford F150 Flareside SuperCab

2 Answers

2005 Ford F150, 5.4L V8, 4x4; The transfer case


Encoder motor located on the transfer case is usually the problem. It is the motor that shifts the transfer case.

Sep 28, 2009 | 2005 Ford F-150

1 Answer

Freeze plugs ford econoline 150


The freeze plugs can be fixed with the engine in the veicle. There are some rubber plugs available that have a bolt thru the middle. Pry out failed plug, push in rubber replacement, tighten bolt to expand rubber. Fixed.

Oct 25, 2008 | 1983 Ford Econoline

1 Answer

Where is my spark plugs located


the spark plugs are located under the ignition coils. Look on the top of the engine and on either side of the throttle body you should see 4 round ignition coils with a two wire harness coming from each. Each one has an 8mm bolt holding them down. remove the bolt on each one to gain access to the plug.... One word of caution though remember which coil goes in which hole or better yet just do them one at a time.

Jul 28, 2008 | 2002 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...