Question about Kia Sportage

Open Question

Misfiring cylinder 3 and 2 for kia sportage 2000

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 439 Answers

SOURCE: 2000 Kia Sportage Losing brake fluid. Is it a big

No it is not that big of a deal. It is normally 2-3 nuts and your brake lines. The things to make sure of is that brake fluid does not get on any of the electronics below the cylinder by using a towel. Also make sure to bleed the cylinder before hooking the brake lines in all the way. Basically you can do this by screwing in the brake lines about half way and hitting the brake pedal about half way down. Make sure the reservoir does not get empty. Bleed it until there is nothing but fluid coming out of both lines. Obviously this is best done with two people. Have them hold the pedal down while you tighten the lines fully and you should be good.

Posted on Nov 06, 2009

Testimonial: "Straight up to the point and very nice. Thanks."

Ad
bomark2002
  • 160 Answers

SOURCE: 2002 KIA SPORTAGE, CYLINDER 1 MISFIRE WHAT CAN

Burnt valve, bad spark plug, bad spark plug wire.

Posted on Nov 07, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

  • 109 Answers

SOURCE: my 2000 kia show no.3

Could be bad spark plug & or wire, try changing the plug & check the wire.

Posted on Jan 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 kia sportage. 190,000 miles. Cylinders 1 and 3 misfire an one random misfire. Had new spark plugs an wires done 8 months ago. What could be the problem?


misfires are normally faulty injectors
run a quality injector through the system or have the injectors pulled and cleaned

Feb 03, 2017 | 2000 Kia Sportage

2 Answers

Code p0303


misfire, cylinder 3.
check spark plug. if its black, there's lack of strong spark. Suspect faultu ignition coil. Good luck!

May 08, 2014 | 2008 Kia Sportage 2.0

1 Answer

Me aparecio el problema p0300, p0301, p0302 y p0600


p0300 random multiple cylinder misfire, 301 is cylinder 1 misfire and 302 is cylinder 2 misfire. p0600 is a communication link fault.

Sep 19, 2012 | 2000 Kia Sportage

1 Answer

My 2000 kia show no.3 cylinder misfire so i replace the coil but nogood still misfireing


Could be bad spark plug & or wire, try changing the plug & check the wire.

Jan 15, 2011 | 2000 Kia Sportage

1 Answer

2000 kia sportage check engine light on for misfire, I changed plugs,wires,coils, When it idles for any period it will start to misfire can u point me in the right direction


a common cause for your problem and many other codes and drve problems is a dirty throttle body as per kia tsb# KT2005100503. clwean real good and it will probably take care of it

May 10, 2010 | 2000 Kia Sportage

1 Answer

Misfire on number one cylinder I have already replaced the plugs, coil packs, injectors, and both convertors. Still have misfire on number one cylinder per scan tool and when idled up the exhaulst turns...


did you check the wiring harness, or broken wire leading to this partigular cylinder? if no signal coming from the ECM, then no firing will occur.

Apr 20, 2010 | 2000 Kia Sportage

2 Answers

Hold light flashing and car wont start


I had a similar problem with the hold light ( i believe that problem is a separate problem from your cylinder misfiring). There is a sensor near or on the tranny that was bad. But, perhaps that sensor being messed up is causing the car to think it is in a different gear and causing the misfire?

Aug 21, 2009 | 2000 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...