Question about 2000 Honda Accord

1 Answer

Transmission wiring 2000 accord

Loose wire on top of transmisson

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    A rookie expert who has answered 20 questions on their first day.


    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Can you follow the wire? does it come out of the harness and connect to the trans? automatic trans.? maybe old custom stereo or alarm wiring? i have the service manual and wiring diagram for 1998-2002. I have a '99.

Posted on Apr 20, 2013

  • James Lillard Apr 20, 2013

    I was going to send the wiring diagrams but this site won't let me or at least I don't know how. so here is where I got mine, If you haven't downloaded a torrent before, I guess i could email it, but try this link first, it has what you need and more that you didn't think you needed, complete service manual.

  • James Lillard Apr 20, 2013 complete service manual with wiring diagram. just download and unzip and there you go.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Honda Accord 1992 Transmission adjustment

try replacing transmisson filter or some call it a strainer

Apr 29, 2013 | 1992 Honda Accord

1 Answer

Drive indicator light flashing on dash

The flashing is the transmission computer's blinking an error code in attempt to tell you what's wrong with it. This is very unlikely to resolve itself, Don't take it to the dealer! Big repairs like this will get your wallet ***** big time. Take it to a transmission specialist.( D-for drive is flashing ). first check the sensor on top of transmission, the wires may be loose or broken. you may also want to change fluid and filter, if it is over due. good-day !

Nov 12, 2011 | 2003 Honda Accord

1 Answer

D4 light flashing all the time and slow getting up to speed

It can be as simple as a wire loose or broken to one of the transmission sensors. Can also be a bad solenoid. Check all wiring going to the transmission. Have you checked the fluid level? There will be an error code stored that a transmission shop can recover. Stop driving the car until you get this sorted out.

Apr 12, 2011 | 1993 Honda Accord

2 Answers

What cause a speed odomter to go hey wire after changeing the transmisson

Could be the vehicle speed sensor, it might be a different calibration [ did you swap the sensors form your old unit to the replacement ? ] or the wiring to it got pinched.

Jan 24, 2011 | 2001 Chevrolet Cavalier

2 Answers

How do I add transmission fluid to a 1992 Honda Accord

Locate the dip stick on the transmission its a very short one it on the front of the transmisson. Using a transmission funnel (it has a long skinny hose) pour fluid through the dipstick hole. Good luck and thanks for using FIX YA, contact if you need more help

Apr 05, 2010 | 1992 Honda Accord

2 Answers

Honda accord transmisson problem

there are solenoid on the transmission, you can take them out and clean the screen then change the transmission fluid.

Feb 27, 2010 | 1999 Honda Accord

1 Answer

Engine missing Have to change sparkplugs every three months to stop problem.This is not normal what is the problem 2000 ford range 4.0 119,000 miles.When I accelerate the tranmission change the engine...

First replace oil and filter in the transmisson next replace the spark plug wires and coat both ends of the wire with dielectric greese this should eliminate your problems. Also do a top engine clan to get rid of carbon build up and clean te throtle plate front side and back plus the port hole the plate is located in. Whith the throttle plate not fully closed it allows unburnt fuel to be depostied on the plate and causes it to run poorly.

Nov 01, 2009 | 2000 Ford Ranger SuperCab

2 Answers

My van is shifting hard at times and we changed the fluid and filter about 2 weeks ago and it was fine until this morning and it started again what could be the problem?

Check the fluid level first clarck the transmisson line loose at the radiator and make sure oil is flowing thru the cooler if it is then you have a problem that will have to be tested at a transmisson shop, there are to many thigs to list that would cause hard shifting but have it checked before you damage any interal parts because if you damage hard parts the fix gets more expensive.

Oct 15, 2009 | 2000 Oldsmobile Silhouette

1 Answer

92 honda accord #3 cylinder no spark

Trade #2 & #3 plug wires. If you loose fire on #2, you have a bad wire if not, replace cap & rotor. The TCU is transmission controller. The ECU is not going to cause a single cylinder mis-fire.

Apr 30, 2009 | 1991 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides