Question about 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

2007 Impala windshield wiper will not work?

Wipers started to work, when I slowed them down they wend down and stopped. Now they will not run at all. Fuses are OK.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You need to check power and ground to your wiper motor if you have power and ground at electrical connection to motor then motor is bad, if your not getting power and ground then you need to look into wiper switch,

Posted on Apr 18, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: my 2007 chevy impala windshield wiper dont work but the motor is running, what do i do?

Your wiper arm that is connected to the wiper motor under the plastic where you remove the wiper arms has come off or broken or the wiper motor is striped out the arm is good and simply need a new motor. You will have to remove the cover under the wiper blades it is as wide as the front of the car. Look under it to see what is actually going on. These are not very complicated repairs and can be done by a novice person. if you need further help please ask me i can send diagrams threw my home email if you think you need it. It is a pretty simple procedure. Also Please remember to rate my solution and leave testimonial this is how i earn my achievements Thanks in advance. .

Posted on Apr 22, 2012

  • 90 Answers

SOURCE: 1999 Chevy Venture, Windshield wipers stop in upright position

You will need to replace the wiper transmission.This is a common problem.

Posted on Jan 24, 2009

  • 1 Answer

SOURCE: Windshield wipers not parking

The problem could be a bent parking pall bracket. This is usually caused when you wipe snow from windshield using the wipers instead of brushing off. You need to remove both wipers and the cover from the drivers side. Remove the cover over the wiper motor assembly (held by a plastic button). On the right side of the wiper mechanism is a small tab (part of the wiper bracket). This tab needs to be straight for the wiper park pall to rest against.Carefully hammer this tab straight (or you may have to replace bracket, big job) Then cycle the wiper and you will see the assembly return to park position. Re-install all parts in reverse order.
Hope this works for you.

Posted on Feb 28, 2009

  • 205 Answers

SOURCE: Rear windshield washer motor works, but no fluid comes out

Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment

Posted on Mar 22, 2009

Tech jk
  • 102 Answers

SOURCE: windshield wipers stuck upright when off

This is a commoon problem with what is called the "Park pawl stop". The tab is most likely bent and needs to be re-aligned, then the wipers need to be re-timed. This re-timing can be a little difficult, although the re-aligning of the tab is failry simple.

TechJK

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you turn off wipers on 2004 Freightliner Columbia


Wipers won't turn off! - iRV2 Forums

www.irv2.com/forums/f22/wipers-wont-turn-off-17955.html

Jul 31, 2007 - 14 posts - ‎8 authors
We also have a problem with the windshield wipers. ... Join Date: Nov 2004 ... Eventually, some time after it stops raining they'll turn off. Wipers would not shut off - Page 2
14 posts
Dec 5, 2010
Wipers won't turn off
14 posts
Apr 25, 2005
More results from www.irv2.com

Windshield wipers not stopping correctly ' TruckersReport.com ...

www.thetruckersreport.com > ... > Kenworth Forum
The issue started today when I was using the wiper/washer. They go up, but the stophalf-way down; go all the way down then half way up; all the way...

2004 FREIGHTLINER Auto Parts - RockAuto


Dec 30, 2015 | Cars & Trucks

2 Answers

Both windshield wipers come on when making turns only shut back off after several minutes or turning off the engine. What could be the problem?


Replace the turn signal switch. This is the only thing that will operate the wipers and washer at the same time.

Apr 19, 2015 | 2007 Chevrolet Impala

1 Answer

Whisper blades come to rest to high on windshield


make sure the wipers are off, then loosen the nut that holds the wiper arm, then push the wiper arm down to the stop position, then tighten the nut, do the other side the same way. That should fix the problem.

Jan 26, 2014 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Windshield wipers stop working


At the base of the wiper arm there is a plastic cap,pop this off ,underneath there is a nut that holds the arm in place ,if it gets loose the post will turn inside the blade.Just turn the wipers off and tighten the nuts with the blade in the parked position.

Jan 23, 2012 | 2003 Chevrolet Impala

1 Answer

Wipers stop in the middle of windshield when turned off


check to make sure the wipers are at its right angle on the vehicle, loose the nuts and place both wipers close to the bottom of the wind screen

Jul 16, 2009 | 2006 Chevrolet Impala

1 Answer

07 Kia Sportage 4x4 V6 Front windshield wipers stopped working.


o yeah take back to dealership where they will fix it for free

May 31, 2009 | 2007 Kia Sportage 4x4 V6

1 Answer

Windshield wipers stopped working


wiper transmission likely came a part in dash rove all covers evaluate what came a part either reconnect or replace item

Apr 05, 2009 | 2007 Chevrolet Cobalt Coupe

1 Answer

Whindshield wipers stuck in a vertical position


This is an easy fix. Likely ice got on your windshield and froze your wipers to the glass then when turned on moved out of position. Take the cover off the base of the wipers and loosen the bolts. Put them down all the way and tighten. When wipers are turned on when frozen to glass the gears want to move but cant and loosens at the base. Please let me know if this does not help and will look into it further but this is probably it. Thanks

Jan 02, 2009 | 2005 Chevrolet Impala

4 Answers

My driver side windshield wiper was frozen to the windshield. I forgot to shut them off when I went to work. When I came out and was brushing off the snow I realized that they were not off. Then the driver...


I just solved this problem last night with my '05 Impala, and ultimately the solution was what newton5083 stated above.  Yet, it may also be this (I found it online somewhere):
You have bent or broken the "park tab" on the windshield wiper motor bracket. The correct way to fix this is to remove the wiper arms, wiper linkage and wiper motor from the wiper motor bracket, and install a new bracket.
I just bent the tab back into place a couple times for our daughters 2005 Impala but it kept getting bent down again when they didn't take the time to make sure the wipers were not frozen to the windshield, or tried running the wipers to remove heavy snow on the windshield. So yesterday I fabricated a small piece of metal and bolted that to the bracket in the same place the tab stop was.
If someone wants to access this bracket and tab-
1. Use a ½ inch or 13mm socket & ratchet or wrench to remove nuts on wiper arms.
2. They may make a special tool to remove the arms, I used a screwdriver and hammer to tap bottom of the arm to wedge them apart from the spindle.
3. Two small button-looking clips hold the drivers side cowl cover in place under the windshield. These are two-piece clips, pry up the center, than the outer piece.
4. Unclip the washer hose from cowl cover, than pull out plastic cover.
5. There is a smaller plastic cover with on plastic button head holding that cover in place. Gently pry under that clip to remove that cover.
6. Now you can see the wiper trans and bracket. You should see a small tab on that bracket that looks pushed down and bent or possible a square small hole with some torn off metal where the tab broke off.
7. Remove small plastic cover over the wiper transmission and you can see a small spring-loaded arm underneath the wiper transmission assembly.
8. You need to find something to pry that tab back up so when the wipers are running that spring loaded little arm just snaps past the tab running clockwise. It's when you shut off the wipers that the wiper transmission assembly reverses rotation counter clockwise and the small spring loaded arm underneath hits that tab stop, than the wipers will go all the way down and shut off as they should.
Once that tab stop gets bent out of the way the little spring loaded arm has nothing to stop the wiper transmission assembly so it keeps traveling counter clockwise until some other stop shuts the wipers off straight up on the windshield.

There is a revised bracket part # which is supposed to be more durable, GM part #12368639. Here is a copy of the TSB which points out this problem:
Bulletin No.: 05-08-43-003A
Date: March 10, 2005
TECHNICAL
Subject:
Windshield Wipers Park in Up Position (Replace Windshield Wiper Motor Bracket)
Models:
2005 Chevrolet Impala, Monte Carlo
Supercede:
This bulletin is being revised to make a correction to the Parts Information. Please discard Corporate Bulletin Number 05-08-43-003 (Section 08-Body and Accessories).

Condition
Some customers may comment that the windshield wipers park in the out wipe (vertical) position.
Cause
This condition may be caused by a bent park tab on the windshield wiper motor bracket.

Correction
To correct this condition, replace the wiper motor bracket. It will be necessary to transfer the following parts listed below to the new bracket.
^ Wiper transmission
^ Wiper motor crank arm
^ Wiper motor
1. Remove the windshield wiper motor drive system module.
2. Remove the windshield wiper transmission from the windshield wiper motor bracket.
3. Remove the wiper motor crank arm from the windshield wiper motor.
4. Remove the windshield wiper motor from the bracket.
5. Install the windshield wiper motor to the new bracket.
6. Install the wiper motor crank arm to the windshield wiper motor.
7. Install the windshield wiper transmission to the windshield wiper motor bracket.
8. Install the windshield wiper motor drive system module.

A TSB is not a recall, if vehicle is still under warranty the dealer should be repaired for free. If not, you'll have to pay for the repairs. 

Dec 10, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2007 Chevrolet Impala LS Sedan New Cars Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...