Question about 1996 Nissan Maxima

1 Answer

Nissan, maxima, engine: 2988 cc, VQ30DE, 1999, manual gear transmission I need correct flywheel and signalsheave flywheel must be equipt by 8mm hole for correct positioning on crankshaft (fitted flywheel is equipt by 6mm hole for positioning in result: engine is'nt running round= ignation is wrong) please assist- thanks in advance regards Joerg B.

Posted by on

  • yadayada
    yadayada May 11, 2010

    suggest u contact a parts store, we are not a parts service, we have no books for info like that at Fixya.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 383 Answers

Topmarincons: In checking this car for flywheels available, Nissan only lists one part number 12310-2Y910. I could find no other references or part numbers superseding this one.
When you list a single sheave, it sounds more like you are describing a front crank pulley. Again, in researching part numbers, I could only come up with one number :12303-31U10. It is commonly referred to as a "Harmonic balancer". In looking at an exploded parts diagram, it shows a serpentine type pulley."Single sheave". As far as sources: This particular part rarely fails.
New, it, dealer retail price is $234.33
Check with salvage yards, you can buy them for a fraction of that price. Another option is to buy an "UNDER DRIVE" unit. This is a part which will add horse power by cutting down on some of the rotating mass, yet not affect that crankshaft harmonics which would affect it at high RPM's. "UNORTHODOX" racing, on-line I believe is one source. Good luck.......

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can some one show me timeing mark on 1997 nissan maxima please


wow a Nissan Camry.
what engine, ??????????
what are you doing, we dont know. so..
cam marks? chain marks?
spark timing?

in 1997, most cars have 6 or more marks.

Nissan V6? is it (guessing i am)
if doing major cam work , you will need far more that just mark data.

if doing serious work, i recommend the below
  1. a real FSM, from NISSAN if Nissan.
  2. alldata.com
warning:1
all nissan engines are All Interference
so doing cam work or finding engine dead,
do a leak down test by hand before cranking engine
or bend the valves.
after replacing chain, do a cyl. leak down test (a tool)
and if it fails, the valves were bent, do not crank engine
or the damage WILL cascade $$$$$$$$$$$$$$

Feb 22, 2014 | 2006 Toyota Camry

1 Answer

How to fix timeing on 1997 nissan maxima


5 post now, and sill in wrong forum. and no engine stated.
do we get 6 posts and same?
look here in wiki
see those enignes.
which one?

which one, ???????????????????????

http://en.wikipedia.org/wiki/Nissan_Maxima


read the FSM. buy one, and read the 58 steps
or alldata.com
nobody will type out the 58 steps, id bet.

Feb 22, 2014 | 2006 Toyota Camry

1 Answer

2003 nissan maxima 3.5l won't go in gear dual mas clutch i replace master clutch slave cylinder except fly wheel couldt that be the problem


ok this is clutch they don't have flywheel. and is a pain to drop transmission to break from engine. but the main clutch needs replacing.

Dec 16, 2013 | 1987 Nissan 300ZX

2 Answers

Crank position sensor is hitting flywheel flywheel got damaged somehow can I bend it down with out a problem or is a new one a must need


What type of car is this..but to answer your question the flywheel would have to be out of round to make contact with the crank sensor i suspect you have a cracked or broken flywheel most of the time they will break at the center of the flywheel where the crankshaft attaches to the flywheel and would still drive for some time

Dec 10, 2012 | Cars & Trucks

1 Answer

Need firing order for 2000 nissan maxima gle


2000 Nissan Maxima 3.0 liter DOHC V-6 (VQ30DE)

94ba627.gif


Hope helps (remember comment and rated this).

Jul 25, 2010 | 1999 Nissan Maxima

1 Answer

Need firing order and diagram


1999 Nissan Maxima GXE 3.0 liter DOHC V-6 (VQ30DE)

9481c27.gif

Hope this help.

Oct 17, 2009 | 1999 Nissan Maxima

2 Answers

Need firing order and diagram for 99 nissan maxima. thanks Barry


1999 Nissan Maxima GXE 3.0 liter DOHC V-6 (VQ30DE)

419865f.gif

Good luck.

Oct 17, 2009 | 1999 Nissan Maxima

1 Answer

1998 maxima vq30de will not start


CHECK GROND ON INTAKE MANFOLD AND TRANS BOLT

Oct 08, 2009 | 1997 Nissan Maxima

2 Answers

1999 Nissan Maxima I want to know if my manual transmission take gear oil or motor oil


USE GEAR OIL!!!!! NO ENGINE OIL!! ENGINE OIL BAD FOR TRANSMISSION. There is a reason for so many different types of oils, and making money off of suckers isn't one of them.

Sep 27, 2009 | 1988 Nissan Maxima

Not finding what you are looking for?
1996 Nissan Maxima Logo

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...