Question about 1999 Chrysler Sebring

1 Answer

Let our Experts solve your "Steering bar under front of 1999 sebring has partially fallen and I want to know if it is easily rep" Problem

Posted by on

  • mike ryner
    mike ryner May 11, 2010

    Does both of your front tire turn when you turn the steering wheel?

  • yadayada
    yadayada May 11, 2010

    is this an advertisement??


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Do you mean the anti sway bar? It has a rack and pinion for steering which if this fell out, you have some major problems. For the anti sway bar you should just have to get new mounts and bushings.

Posted on Mar 11, 2009

  • Eldric Venne
    Eldric Venne Mar 11, 2009

    Do you mean the anti sway bar? It has a rack and pinion for steering which if this fell out, you have some major problems. For the anti sway bar you should just have to get new mounts and bushings.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i adjust the tightness of the power steering pump belt 2008 chrysler sebring 2.7

  1. From the top of the vehicle loosen pivot bolt Power Steering Belt Adjustment
  2. From under the vehicle loosen the locking bolts F and G
  3. Install the belt. Adjust belt tension with 1/2 in. breaker bar installed in adjusting bracket Power Steering Belt Adjustment
  4. Tighten locking bolt G to 28 N·m (250 in. lbs.)
  5. Tighten locking bolt F and the pivot bolt to 54 N·m (40 ft. lbs.)


May 05, 2014 | 2008 Chrysler Sebring

1 Answer

Do I have to take the gas tank off a 1999 chyrsler sebring jxi to change fuel pump or can i remove the back seat

I would hope there is no hole under the back seat with access to the gas tank. I'm sure that would be a potential health hazard. Every electronic fuel pump I've seen you have to drain the fuel and remove the tank. It is not a fun job. I would take it to a mechanic. If you make a mistake with it you can very easily damage the fuel pump or a seal and cause a leak.

Dec 02, 2011 | 1999 Chrysler Sebring

3 Answers

Key won't turn in my ignition on 99 sebring

have you tried jiggling the steering wheel back and forth while you turn the key.

Feb 06, 2011 | 1999 Chrysler Sebring

1 Answer

My 1999 Sebring Covertible steering wheel keeps locking and I can't turn the car completely off. I can turn the engine off but the speedometer doesn't completely turn off nor the cargo lights. So it drains...

Might have to replace the ignition assembly. The bolts on the steering column must be drilled out. There is a pin the retracts into a hole that locks the steering wheel, and it is part of the ignition Assembly. The two new bolt tighten down untill the heads break off so know one can remove the ignition to steel the car.

May 01, 2010 | 1999 Chrysler Sebring

1 Answer

I have a 1999 camry LE which is making a knocking noise on both sides(more on the right side) at the front like if the struts/ball joints are bad; I changed the both struts, ball joints and the noise is...

The outer tie rod ends can make a clanging noise if they are loose. You can easily check them - grab a hold of the tie rod and try to move it around to see if it has any play in the steering knuckle..

The noise could also be caused by the stabilizer/sway bar. Check the bushings and check the links for wear.

Mar 27, 2010 | 1999 Toyota Camry

1 Answer

Power steering belt diagram for 2004 sebring 4 cyclinder

the diagram should be posted on the core support in front of the radiator or even under the hood of the vehicle have you looked to your owners Manuel as well however it should clearly be posted under the hood or on one of the strut towers along the side at some point

Sep 06, 2009 | 2004 Chrysler Sebring

1 Answer

2001 Chrysler Sebring- difficulty steering,

the belt will be on the front pulley on the power steering pump

Apr 22, 2009 | 2001 Chrysler Sebring

2 Answers

Replacing the battery in my 1999 Sebring Convertible

take the driver front wheel off then there a flap under the fender well remove it and there your battery

Mar 29, 2009 | 1999 Chrysler Sebring

3 Answers

Wheel hub assembly front 1997 sebring

  1. Raise and safely support the vehicle.
  2. Remove the front tire and wheel.
  3. Remove the steering knuckle assembly, as described previously.
  4. Remove the bolts attaching the hub/bearing assembly to the steering knuckle.
  5. Remove the hub/bearing assembly from the front of the steering knuckle. The bolt-in front wheel bearing used on the vehicle is transferable to a replacement steering knuckle, if the bearing is in serviceable condition. If the bearing will not come out of the steering knuckle, it can be tapped out using a soft-faced hammer.
  6. a567c9e.jpg

  1. Thoroughly clean all parts, including the hub/bearing assembly mounting surfaces on the steering knuckle.
  2. Install the replacement hub/bearing assembly onto the steering knuckle, aligning the bolt holes of the bearing flange to the knuckle.
  3. Install the attaching bolts and tighten evenly to make sure the bearing is square to the face of the steering knuckle. Tighten the attaching bolts to 80 ft. lbs. (110 Nm) on Cirrus, Stratus, Sebring convertible and Breeze, or 65 ft. lbs. (88 Nm) on Sebring coupe and Avenger.
  4. Install the steering knuckle assembly, as previously described.
  5. Install the tire and wheel.
  6. Lower the vehicle and check for proper operation.

Feb 01, 2009 | 1997 Chrysler Sebring

Not finding what you are looking for?
1999 Chrysler Sebring Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides