Question about Nissan Cars & Trucks

Open Question

Looking for injecter pump and cam marks for nissan cd20 nissan disele

Nissan serera cd20 diesel injecter pump timimng marks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: HELP!!!!need timing marks for pajero 94 2.8 auto *** import

there is a little mark on the crankshaft which you line up with the 'o' mark on the casing ..
remove the cam cover and look at the cam you should see a nob on the cam about 3 th lob and that should be facing just left of the engine ..
if you have a turbo there is two notchs on the injection pump pully ..if turbo there is a 't' mark on the rear of the cover the notch on the pully should mark up with the 't'..
the timing is set..

Posted on Mar 09, 2009

  • 1 Answer

SOURCE: 1996 Volkswagon Jetta Timing Belt replacement Procedure

there are 3 thing need to be fixed first the top timing belt pully should be between o.t so should be on . between o.t and secondremove the distrubuter cap it should be one mark 1 which is pointing on block and 3rd is crank shaft should adjust on 0 which you will find on the gearbox there is a green ruber cap remoce it and turn the main crank shaft u will find mark on the frywheel 0.
Thats it

Posted on Sep 24, 2008

alicantecoli
  • 22095 Answers

SOURCE: need the timing marks for a 3.1 td 5 cyl diesel injection pump

isusu engine?? have you looked for a 8mm hole in timing gear that corresponds with a hole on plate behind then lock it in with a bolt ,remove bolt after tightening belt .DONT FORGET THIS ???.....if you cant find anything do it with no timing marks easy --- piston no 1 at tdc valves closed spin pump till fuel comes out of no 1 injector feed and lock it all together,indirect diesel is 6/8 ,,,,,direct injection is 12/16,,,,and turbo is 18/22 btdc

Posted on Dec 13, 2008

  • 17 Answers

SOURCE: Nissan Largo 1995

do the thermostat and water pump, just did my cd20 and there was nothing left of the water pump

Posted on Aug 12, 2010

  • 153 Answers

SOURCE: where can i find timing

Hi, no marks as such, but with the crank marks lined up to TDC No/1 if you look at the cam pulley and the pump pulley you should see a hole in both at about 2o'clock position, these holes should line up with corresponding holes of which you screw a bolt in each ( I think they are 8mm metric ) by doing this the bolts hold both pulleys in the correct position with crank marks aligned, cheers hope that helps

Posted on Oct 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A Isuzu NPR 4hf1 rotary pump timing marks set


Hi. If it has a rotary pump, the pump needs to be installed with the crank at 49 deg BTDC on the compression stroke cyl 1. Mark dot gear on pump with white paint. Line up dot gear on pump with line on pump bracket and install. Remove PRM sensor from bell housing and check if line on pump gear is still lined up with line on pump bracket.

Feb 05, 2015 | Isuzu Cars & Trucks

1 Answer

Does anyone have a diagram for the timing marks on a case g188d diesel engine that I could see


if you know where the timing marks are supposed to be the use the old method of cam/crank timing to check and adjust to where the marks will be. Remove no 1 injector and turn the engine over until no 1 piston is coming up on injection stop when you reach TDC. mark on flywheel of harmonic balancer. If there is valve clearance ot both rockers turn the engine another 180 degrees and bring the piston to TDC again. watch the rockers and if you turn back a few degrees or turn forward a few degrees you will see ( in the forward direction) the exhaust valve closing and at the same time the inlet valve will be opening. This is known as valve rock. As you move the piston bacvk and forward over TDC you will see the valve movement. set on TDC and check the timing marks with the positions indicated. Remove and reposition the cam shaft gear to achieve the correct mark alignment or pull the cam shaft out just enough to realign the teeth to the mark. At the most you will be about 1 tooth out. The pump timing will be out 180 degrees as you are setting the valve timing on the induction stroke and you will need to turn the engine 180 degrees to compression stroke for the pump timing marks to line up. the injection mark on the flywheel is what you are looking for and when it is at the correct number of degrees as indicated by injection / lightning flash sign then the marks for the pump should be just about lined up

Dec 04, 2014 | Cars & Trucks

1 Answer

Just done head on my grand vitara and it wont start disel and pump but not going to injecters


what country? welcome to the WWW, (world wide web)
if in USA we have alldata dot com.
if not, try Suzuki, they sell the FSM and all that is in there,
Suzuki uses many diesels world wide, even German.
first find out which diesel in in yours.

Feb 04, 2013 | 1999 Suzuki Grand Vitara

1 Answer

Ford ranger 2.5 diesel pump timing marks


Could you give me injection pump gear pump timing for a Ford renger 2.5 diesel 2007 please

Apr 29, 2012 | Cars & Trucks

1 Answer

2001 f350 diesel craks but wont start


SOUND LIKE THE ELECTRIC LOW PRESSURE FUEL PUMP CHECK FUSE TO SEE IF PUMP GETTING POWER. IF NOT REPLACE FUSE AND CHECK THE WIRE TO PUMP.IF PUMP IS GETTING POWER..REPLACE FUEL FILTER FIRST.IF IT DONT HELP.COULD BE THE ELECTRIC LOW PRESSURE PUMP. FAULTY. IT PUMPS DIESEL FUEL IT INTO INJECTION PUMP TO BE PRESSURIZED TIMED AND INJECT.SEE IF LOW PRESSURE PUMP DONT WORK THE WHOLE ENGINE WONT RUN.THE INJECTION PUMP NEED FUEL FROM LOW PRESSURE ELECTRIC PUMP TO RUN ENGINE.

Aug 11, 2009 | 2001 Ford F350 Super Duty SuperCab

4 Answers

HELP!!!!need timing marks for pajero 94 2.8 auto *** import


there is a little mark on the crankshaft which you line up with the 'o' mark on the casing ..
remove the cam cover and look at the cam you should see a nob on the cam about 3 th lob and that should be facing just left of the engine ..
if you have a turbo there is two notchs on the injection pump pully ..if turbo there is a 't' mark on the rear of the cover the notch on the pully should mark up with the 't'..
the timing is set..

Feb 05, 2009 | 1994 Mitsubishi Montero

1 Answer

Need the timing marks for a 3.1 td 5 cyl diesel injection pump


isusu engine?? have you looked for a 8mm hole in timing gear that corresponds with a hole on plate behind then lock it in with a bolt ,remove bolt after tightening belt .DONT FORGET THIS ???.....if you cant find anything do it with no timing marks easy --- piston no 1 at tdc valves closed spin pump till fuel comes out of no 1 injector feed and lock it all together,indirect diesel is 6/8 ,,,,,direct injection is 12/16,,,,and turbo is 18/22 btdc

Dec 13, 2008 | 2001 Jeep Grand Cherokee

1 Answer

Nissan Largo 1995


do the thermostat and water pump, just did my cd20 and there was nothing left of the water pump

Aug 05, 2008 | 1990 Nissan Minivan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...