Question about 2007 Ford Ranger FX4 Off-Road
Where are the timing marks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Rotate the engine so that No. 1 cylinder is at TDC on the
compression stroke. Check that the timing marks are aligned on the
camshaft and crankshaft pulleys. An access plug is provided in the cam
belt cover so that the camshaft timing can be checked without removal
of the cover or any other parts. Set the crankshaft to TDC by aligning
the timing mark on the crank pulley with the TDC mark on the belt
cover. Look through the access hole in the belt cover to make sure that
the timing mark on the cam drive sprocket is lined up with the pointer
on the inner belt cover.
The spring cannot be used to set belt tension; a wrench must be used on the tensioner assembly.
Posted on Nov 25, 2009
My apologies for the delayed response. I am going back to answer unanswered questions.
CLICK on the following LINK. It has the Timing Belt & Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Posted on Mar 03, 2010
I found this website, hope it helps.
Posted on May 20, 2010
Tips for a great answer:
Oct 29, 2015 | 2006 Ford Ranger
Oct 20, 2014 | 2007 Ford Ranger 2.5
Jun 20, 2014 | 2007 Ford Ranger FX4 Off-Road
May 20, 2010 | 1993 Ford Ranger SuperCab
May 01, 2010 | Ford Ranger Cars & Trucks
Mar 19, 2010 | 1996 Ford Ranger SuperCab
Feb 22, 2010 | 1994 Ford Ranger Supercab
Feb 02, 2010 | 1986 Ford Ranger 2WD
226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: