Question about 2006 Toyota Sequoia Limited
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
These codes are all for the Evaporative Emissions System.
P0440- Evaporative emissions system fault- just saying there's something wrong with the system.
P0441- Evaporative emissions system- Incorrect purge flow- saying that the system isn't purging the raw fuel vapors (hydrocarbons- HC) as well as it should.
P0446- Evaporative emissions system- Control valve circuit low- there is a valve, usually located on the charcoal canister at the rear of the vehicle, that opens to allow fresh air to enter the evaporative emissions system as the engine vacuum purges the fuel vapors from the charcoal canister and closes when purge is not needed to prevent leakage of those fuel vapors to the atmosphere (HC is a greenhouse gas and is regulated as such by the fed gov't).
Given that you have the incorrect purge flow code and the control valve code together, my bet is that the vent control valve has failed (causing the P0446) and is not opening to allow fresh air into the system to displace the air from within the system that is being pulled to the engine. Since you have no fresh air entering the system, the engine will pull a vacuum on the system instead of the vapors "flowing" into the engine (causing the P0441).
I hope that this is helpful to you!!!
ASE Master Technician with L1 and X1 Certifications; Nissan Scope Technician; Chrysler Level 3 Silver Technician- 12+ years experience.
Posted on Nov 17, 2008
That code is for the evaporative emmisions system. Here is a link to an open forum you can go to, this will help you understand what it is, and why. The vehicle on the site is a van, but the code, and parts involved are one in the same, so don't worry about the difference in vehicle. The van is a toyota, and this is the information on the p0446 code. Hope this helps you.
Posted on Mar 08, 2009
Both codes are with the EVAP SYSTEM, there are numerous items it could be. A repair shop that does Toyotas or the delaler would be the best to check it out for you. Its not anything that will leave you walking or disable the car.
Posted on Nov 13, 2009
Tips for a great answer:
Dec 15, 2016 | 2002 Toyota Sequoia
Apr 02, 2015 | 2002 Toyota Sequoia
Nov 17, 2009 | 2002 Toyota Corolla
Oct 09, 2009 | 2002 Toyota Sequoia
Sep 09, 2009 | 2004 Toyota Sequoia
Jun 26, 2009 | 2002 Toyota 4Runner
489 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: