Question about 1997 Dodge Neon

2 Answers

1997 Dodge Neon left signal lights work great. Right side blinks very fast.

Flasher and left turn signal works great, but right blinker blinks very fast both front and back bulbs has been replaced as well as the flasher. the lights works but flash very fast when you turn on right hand signal lights.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 2,899 Answers

Check all four of the turn signal lights. Usually one of the bulbs is bad. Sometimes is lit but not flashing, sometimes it is off. Replace that bulb.
Hope this helps.

Posted on Apr 16, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Has the car been in a fender bender ? check for wiring going to the front and rear lights to see if on has rubbed into a ground wire or the body. ( even if there has been no accident.)

Posted on Apr 18, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

red54eyejp
  • 25 Answers

SOURCE: front driver side turn signal light doesn't flash

replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

Posted on May 09, 2009

  • 52 Answers

SOURCE: Left turn signal blinks fast in rear and regular in front

the bulb is blown out. you need to change it. also if the bulb is not blown out or if the blinker still blink fast after you change the bulb then you have a ground problem. just remove that blinker light and check the ground wire on it. if you need to replace it and find a good groun on the car. you should be fine. this is all it is .

Posted on Jun 04, 2009

kidspeedy
  • 321 Answers

SOURCE: left rear turn signal light on my 1999 chev. s10 is not working

any increase in bink speed is direcly related to a bulb being burt out.

Posted on Jun 12, 2009

  • 1 Answer

SOURCE: turn signals flashing too fast

Yes, This is easy. Recall on this problem. Take into dealer for free recall solution and it will stop.

Posted on Jun 29, 2009

  • 39 Answers

SOURCE: Blinker blinks fast, replaced bulb, it burned out too

Most cars have separate flashers for each side now, and in fact, if it still blinks, even though faster than normal, there's probably a short circuit somewhere on the light wire where it's exposed and making contact with the frame of your car or some other metal part, which then causes the bulb to burn out.

Posted on Jul 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

1 Answer

Cant resolve a blinker issue, Tried the easy stuff.


The signal wire going to the right front has a splice for the dash indicator, a wire branching off from the turn wire and going to the dash. It sounds like that right signal wire is broken or lost a connection before it splices off to the dash, so the problem sounds like it is under the dash, either coming out of the turn signal switch to the flasher or from the flasher to that splice. You may need a multi-meter to check voltages on that wire at various places under the dash. Ascertain which color wire you need to concentrate on. Check for voltage on it with key on and right blinker on-voltmeter will spike to battery voltage, then fall to zero as the flasher breaks voltage continuously, if checked after the flasher. If checked when leaving the turn switch, it should be a continuous signal on that wire. Think you better find a wiring diagram to find the right wire to check. Good luck.

Apr 27, 2013 | 1998 Buick Century

1 Answer

2005 Dodge Magnum RT. Left turn signal in rear, flashes fast rear bulb replaced but blinker still blinks fast occassionally and rear turn signal light socket has no voltage when this happens. Where is the...


When its blinking fast look at both front and rear to verify which bulb isnt flashing. If the right works OK, then the flasher is OK. The flasher is INSIDE the front control module/integrated power module. If you cant find the problem, you may need a dealer to check it.

Aug 29, 2011 | 2005 Dodge Magnum

2 Answers

Brake light and blinker on driver side does not work even after replacing bulb


I am assuming that the right (passenger side) turn signal light (blinker) is working fine. This will usually mean that the electronic flasher is not malfunctioning due to the fact that one side still works.

Since the right side brake light is working, I can also assume that the brake light switch is okay.

It is possible that more than one bulb may have been out. The quickest way to test this is to turn on the hazard lights and slowly walk around the vehicle. Make a note of which lights are flashing on one side of the car and compare that to the other side. One bad turn signal bulb (front or rear) is enough to prevent that whole side from blinking. It is also possible that a single bulb is responsible for both turn signal and stoplight. Make certain that the bulb that was replaced was not the back-up bulb. Replace all other bulbs found to be burned out.

And finally, check to see if there is power to the bulb socket. If it is a double-contact socket, there should be power to one of the contacts for "parking lights", while the other contact should be for "brake lights". Make sure the correct bulb was installed.

Apr 04, 2011 | 1997 Dodge Neon

2 Answers

89 Toyota Pickup right turn signal doesnt work just buzzes


check all bulbs,inspect sockets for corrosion,rust ,or sighns of overload.follow wires and check connectors if all good ,replace the flasher ,,if that doesnt fix it ,the blinker switch in the steering coulmn would be next

Sep 22, 2009 | 1990 Toyota Pickup

2 Answers

Fast Blinker


Usually a fast turn signal means that there is a light out. You should probably check all of your lights, including back-up lights, and turn signals. If there is one out then replacing the burnt out bulb should fix the problem.

May 10, 2017 | 1997 Jeep Grand Cherokee

3 Answers

1997 dodge avenger turn signal probs and location


replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace

Mar 20, 2009 | 1997 Dodge Avenger

Not finding what you are looking for?
1997 Dodge Neon Logo

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...