Question about 2008 Acura Tl
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.
btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and the ignitor. The bulbs usually start to loose their color long before they burn out. The inverters/ballasts either go out after a while or take a while to start up.
Before you spend money on a new bulb, try swapping it with the one on the other side. You'll need a security torx screwdriver to get the covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.
If the problem stays on that side, try swapping the ignitors. They're mounted inside the black covers.
If the problem is still on that side you've got a bad inverter. They're mounted on the bottom of the headlight assembly. You'll need to remove the front bumper and remove the headlight assembly to get to it. (I recommend you take pictures as you remove things so can put them back together correctly.)
Posted on Jan 05, 2009
First of all removing of radio will definitely give you alot more room. (rememeber you will nee radio code after you unplug radio) I would recommend that you disconnect battery before you EVER work on air bags. This module is pretty simple to remove but it is help by Special TORX screws. after removal of screw it its a yellow latch to pull across and unplug. Good luck thanks for using FIX YA
Posted on Jan 14, 2009
Follow this link. There is detailed step-by-step info here
Please kindly let me know if it works for you
Posted on Jan 31, 2009
The advise by Techbuster was a bit off. The '09 is a bit different than the earlier models. To change the filter, pull the center divider in the glove box straight forward. The cabin filter housing in immediately behind it. Push the two clips on the outer edges inward and slide the tray out. Replace the filter, reinsert the tray, replace the center divider.
Posted on Jul 03, 2010
First you need the SRS System Diagnosed for
That is why any check light comes on
Assuming you had the car repaired,then the shop
should have turn off the light, as well as a though
There is no resetting or turning off of ANY MIL Lamps,
as you just remove what data is stored & needed to
repair any vehicle.
If the codes are cleared, they will come back along with
To see if the light will return or the problem wasn't an
issue is a waste of time & lack of system knowledge
Accept the fact that at least once a year with todays
technology,you will have check lights & expensive repairs
That is here to stay forever
Posted on Jul 26, 2012
Tips for a great answer:
Jan 08, 2016 | 1998 Acura CL
Dec 15, 2015 | 1997 Acura TL Series
Feb 06, 2013 | 2008 Acura Tl
Feb 11, 2011 | 2008 Acura Tl
Jan 31, 2010 | 2000 Acura TL
Sep 16, 2009 | 2009 Acura TL
Apr 21, 2009 | 2004 Acura TL
Jan 11, 2009 | 1997 Acura TL Series
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: