Question about 1993 Plymouth Voyager

2 Answers

93 plymouth voyager

Trying to find out the in lbs to ft lbs. need to know 72 inch lbs to ft lbs and 41 inch lbs to ft lbs

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,050 Answers

Easy peasy, 12 inch-lbs is 1 ft-lb, sooo! 72 inch lbs is 6 ft-lbs and 41 inch-lbs is about 3.5 ft-lbs.

Basically 72 is just hand tight and 41 is snug ;-)

Posted on Mar 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

Divid by 12
1 ft lb = 12 in lbs

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs of head bolts for 1994 mighty max pick up


2.0L Gas Engine : 65 to 72 ft lbs 2.4L Gas Engine : 65 to 72 ft lbs
2.6L Gas Engine : 65 to 72 ft lbs 3.0L V6 Gas Engine : 76 to 83 ft lbs 2.3L Turbo Diesel Engine : 76 to 83 ft lbs 2.5L Turbo Diesel Engine : 76 to 83 ft lbs

Aug 23, 2011 | 1991 Mitsubishi Montero

1 Answer

What is the torque setting on the bolt that fastens the drive pulley to the crank shaft on a 98 Plymouth voyager 3.0 L engine.


Torque setting for harmonic balancer / pulley on the 2.5 and 3.0 engine is 132 ft/lbs

Please remember to rate this answer! Thanks, Mike

Jun 12, 2011 | 1998 Plymouth Voyager

2 Answers

Need to know the torque on head screws for honda accord 93 2.2lt ex


On 1990-93 Accords, tighten the bolts to 29 ft. lbs. (40 Nm) on the first pass, 51 ft. lbs. (70 Nm) on the second pass, then tighten the bolts to their final torque of 78 ft. lbs. (108 Nm).


chuckster57_43.gif

May 29, 2011 | 1993 Honda Accord

1 Answer

Need to know the torque specs for 1993 voyager van cylinder head. 6 cylinder 3.0 litr


According to what I found online, the torque spec for the 1993 3.0L is 91ft/lbs, loosen and re-torque to 91 ft/lbs

This link is where I got the information, it is a PDF download

Good luck, Jim

May 01, 2011 | 1993 Plymouth Voyager

1 Answer

What is the cylinder head bolts torque specs for the 1992 pick up with 2.3 engine (4ZD1)


ISUZU 2.3 137 4ZD1 86-95 43 FT/LBS 72 FT/LBS 58, 72 FT/LBS
ISUZU 2.3 137 4ZD1 85-87 43 FT/LBS 72 FT/LBS 58, 72 FT/LBS

http://www.aera.org/downloads/Torque3.pdf

Dec 25, 2010 | 1994 Isuzu Pickup

1 Answer

Head bolt Torque specs for a 1998 Plymouth Voyager


according to the manual

Step 1: Bolts 1 - 8 to 61 N·m (45 ft. lbs.)

† Step 2: Bolts 1 - 8 to 88 N·m (65 ft. lbs.)

† Step 3: Bolts 1 - 8 (again) to 88 N·m (65 ft. lbs.)

† Step 4: Bolts 1 - 8 turn an additional 1/4 Turn.

(Do not use a torque wrench for this step.)

NOTE: Bolt torque after 1/4 turn should be over 122
N·m (90 ft. lbs.). If not, replace the bolt.

Nov 25, 2010 | 1998 Plymouth Voyager

1 Answer

What is the torque settings on the head bolts for 2002 nissan x-terra 2.4litre?


① Step 1: 22 ft. lbs. Step 2: 59 ft. lbs. Step 3: Loosen completely then retorque to 22 ft. lbs. Step 4: 18-25 ft. lbs. Step 5: Plus 86-91 degrees ② 10-12 ft. lbs. plus 60-65 degrees or 28-33 ft. lbs. ③ The cylinder heads and the lower intake manifold are installed together Step 1: Tighten the cylinder head bolts to 22 ft. lbs. Step 2: Tighten the cylinder head bolts to 43 ft. lbs. Step 3: Loosen the cylinder head bolts completely Step 4: Tighten the cylinder head bolts to 84 inch lbs. Step 5: Tighten the intake manifold fasteners to 35 inch lbs. Step 6: Tighten the intake manifold fasteners to 13 ft. lbs. Step 7: Tighten the intake manifold fasteners to 12-14 ft. lbs. Step 8: Loosen all intake manifold fasteners completely Step 9: Tighten the cylinder head bolts to 22 ft. lbs. Step 10: Tighten the cylinder head bolts 60-65 degrees Step 11: Tighten the cylinder head sub-bolts to 80-105 inch lbs. Step 12: Tighten the intake manifold fasteners to 35 inch lbs. Step 13: Tighten the intake manifold fasteners to 78 inch lbs. Step 14: Tighten the intake manifold fasteners to 70-84 inch lbs. ④ 10-12 ft. lbs. +60-65 degrees ⑤ Step 1: 72 ft. lbs. Step 2: loosen completely to 0 ft. lbs. Step 3: 29 ft. lbs. Step 4: Plus 75 degrees clockwise Step 5: Plus 75 degrees clockwise ⑥ Step 1: bolts 11-22 19 ft. lbs. Step 2: bolts 1-10 29 ft. lbs. Step 3: bolts 1-10 Plus 60-65 degrees ⑦ Step 1: 20 ft. lbs. Step 2: loosen to 0 ft. lbs. Step 3: 14 ft. lbs. Step 4: Plus 85-95 degrees ⑧ Step 1: 31 ft. lbs. Step 2: Plus 60 degrees ⑨ 83 inch lbs. ⑩ Stud bolt: 11 ft. lbs. Nuts: 31 ft. lbs. ⑪ Step 1: 72 ft. lbs. Step 2: loosen completely to 0 ft. lbs. Step 3: 29 ft. lbs. Step 4: Plus 90 degrees clockwise Step 5: Plus 90 degrees clockwise ⑫ Bolts: 17-24 (M8) 16 ft. lbs. Install rear main seal Bolts: 1-16 (M10) 26 ft. lbs. Bolts: 1-16 (M10) Plus 90 degrees clockwise ⑬ Step 1: 33 ft. lbs. Step 2: Plus 84-90 degrees clockwise ⑭ Intake manifold collector: Bolts and nuts: 8 ft. lbs. Stud bolts: 61 inch lbs. ⑮ Intake manifold: Bolts and nuts: 5 ft. lbs. and than to 21 ft. lbs. Studs: 8 ft. lbs.

Jan 10, 2010 | 2002 Nissan Xterra

2 Answers

WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN BEARING AND BIG END BEARING CAPS FOR ISUZU 4JG2 ENGINE


Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Jul 10, 2009 | 1994 Isuzu Trooper

1 Answer

I need to drop transmission but it's hooked up to something that won't let me drop it. i need to know what it can be that i have to remove.


Transaxle Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Attach a support fixture to the engine lifting eyes.
  3. Drain the transaxle.
  4. Remove or disconnect the following:
    • Negative battery cable
    • Air intake assembly
    • Clutch slave cylinder
    • Speedometer cable
    • Shift cables
    • Starter motor
    • Axle halfshafts
    • Flywheel cover
    • Transaxle mount
    • Transaxle flange bolts
    • Transaxle
To install:

NOTE Use new circlips, split pins and self-locking fasteners for assembly.
  1. Position the transaxle to the engine and tighten the flange bolts to the following specifications:
    • M8 bolts: 72–84 inch lbs. (8–10 Nm).
    • M10 bolts: 22–25 ft. lbs. (30–35 Nm).
    • M12 bolts: 32–39 ft. lbs. (43–55 Nm).
  2. Install or connect the following:
    • Transaxle mount and torque the bolts to 65–80 ft. lbs. (90–110 Nm)
    • Flywheel cover and torque the bolts to 72–84 inch lbs. (8–10 Nm)
    • Axle halfshafts
    • Starter motor
    • Shift cables
    • Speedometer cable
    • Clutch slave cylinder
    • Air intake assembly
    • Negative battery cable
  3. Fill the transaxle.

May 06, 2009 | 2003 Hyundai Tiburon

1 Answer

Need to the torque specs for a 1999 Dodge Durango


Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs recheck final torque in sequence.

Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)

Apr 07, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
1993 Plymouth Voyager Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...