- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What DTC code(s) are you getting?
You performed a compression test on cylinder #1; did you test cylinder #2?
Compare the readings, if there is a significant difference in compression readings between the two, you may have a bad head gasket, a bad valve, etc.
The bottom line, the problem is internal to the engine.
Locate the ignition coils - they are mounted on the ignition module. Remove the wide connector that goes to the module. You will have to unscrew it first. Spray some WD40 on the connector pins and try to scrub them with a tip of a small screwdriver. Be delicate not to brake or bend anything. Reconnect the connector. Start the engine and see if it still misses.
If it still does, try to touch/move each of the wires that go to the ignition module. BE VERY CAREFUL not to touch any of the moving parts of the engine as you have to do it with engine running.
If it still misses, do the following.
1. Engine off
2. Mark the ignition wires so that you reconnect them later in the same order
3. Locate the coil which gives spark for cyl 1
4. Switch locations of this coil with any of the two remaining coils
5. Reconnect the wires
6. Start the engine
If it now misses on another cylinder, you will have to buy a new coil.