Question about 1990 Buick LeSabre

1 Answer

Drivers door inside panel can't get it off

I need to get into the door to find out why the window fell in, but i can't get the door panel off

Posted by on

  • 1 more comment 
  • shewolf074 Mar 21, 2009

    front window falls in and my windows are electric

  • Aaron Dea May 11, 2010

    exactly what kind of car is it. A limited, 3.1 ect.....

  • robert pergola May 11, 2010

    electric windows or manuel?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 jeep liberty, window drive broken, fell down, now rear door is locked and cannot open inside or out


If your careful you can get the door panel out of the window trim at top with out breaking it. Hooter day is best to do it as the plastic panel is more pliable. Once out wedge it back some and pull the trim out. This will give you a good inch plus gap to work threw. Most like the cable has wrapped around it. Flash light to see it and bent coat hanger, long screw driver or bar. You should be able to get it open.

May 27, 2015 | 2004 Jeep Liberty

1 Answer

Drivers side window fell. what caused this and how do i fix it?


Broken Window Regulator Cable

Remove the inside door panel to access
the inside of door, to replace necessary parts

Jul 30, 2011 | 2002 Lincoln LS

1 Answer

The drivers door window fell inside the door, is there a schematic that I can look at to see why it fell


You need to remove the door panel

When you have access to the inner
door, your question will be answered

Has to come apart anyway,so have at it

Jun 08, 2011 | 1988 Oldsmobile Cutlass

1 Answer

Window driver side fell inside door how do I get inside to repair


you need to pull off the panel for the driverside door. before you pull or yank on it look to see if there are any screws holding it on.

Jun 04, 2010 | 2004 Ford F150

1 Answer

Drivers electric window suddenly fell down inside of door


thw window either came off the window slider or the slider bracket, this can be determined by removing the door panel. this could also be cable driven and the cable has disconnected or broke, can also be determined by removing door panel.

Oct 01, 2009 | 2001 Volkswagen Golf

1 Answer

2005 volvo s60 inside door latch broke


That is not true.
The handle fell off on the inside. You can remove all the screws, remove window and lock controls. Then take a large flat-tipped screwdriver gently pry off door panel. Pull up and off when loose. You will now have access to inside off door and put the rod back in the handle hole. If the plastic holder piece is broke you will need another one. Cheap.


Oct 01, 2009 | 2002 Volvo V70

1 Answer

Why did my drivers side window fall into the door?


the window is hooked in to a braket in the door to the reglator could of poped out and fell or something is wrong with the regulator where it mounts to the inside the door have to pull off interior panel to see inside door

Aug 15, 2009 | 2003 Hyundai Tiburon

1 Answer

Window off track driver side 1997 sebring


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 23, 2009 | 1997 Chrysler Sebring

Not finding what you are looking for?
1990 Buick LeSabre Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...