Question about 1996 Jeep Cherokee Country

1 Answer

Problem with low beams on my 96 jeep charokee sport

The lo beams don't work when I turn the lights on...but the high beams do....tried changing the head lights still nothing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Check dimmer switch on steering column

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dimmer switch


you could always add a good pair of aftermarket fog lights that come with a relay kit and switch you mount to the dash .The only thing is by most laws you cannot run high beams w/aftermarket fog lights on at the same time only low beam ,they have to be manually turned off for oncoming traffic.You can get a good set for around $65.00.These kits come with easy instructions.

Dec 13, 2013 | 2001 Jeep Cherokee

1 Answer

Jeep Cherokee sport headlights not working. High beams okay. Replaced headlights


i would check the switch first. have a helper with a testlight or voltmeter help you chase the voltage down. where the voltage stops is usually the problem

Nov 10, 2013 | Cars & Trucks

2 Answers

Prius high beam lights work but low beam lights do not work?


On a 2008 Prius, If both High beams work but only one side has working low beams, then it is most likely a fuse. So before breaking your knuckles to change the bulb, check the fuse first. I found out the hard way as my mom distressed to me that her drivers side headlights were out. So without checking to see if low and high were working, I proceeded to remove and replace the bulb - ouch! There are 4 10 amp fuses that protect the circuits for low/high beam function. They are under the hood in the fuse box on the drivers side and they are marked on the box cover. Check them before changing the bulb.

Oct 29, 2012 | 2006 Toyota Prius

1 Answer

Low beams don't work on 1997 Honda Civic


If your high beams work and your low beams do not work... try changing the light bulbs first. The low beams can burn out and the high beams still work.

May 01, 2012 | 1997 Honda Civic

1 Answer

My high beam lights work but my lo beam lights don't,can you help me


When you switch from High to Low beams, do the lights go out, or continue, in the "High" beam position??? If they go go, the transfer switch, that changes the high/low beam mode is working. The most likely problem, is that the Low Beam filaments are both burned out. Some, on original equipment, never changed, can burn out within days/weeks of each other. Could be that.

Sep 01, 2011 | 2004 Kia Sorento

1 Answer

I have a 1996 Jeep Cherokee. Headlight Problem: Year ago? Switched on high beams, complete darkness (low beams don't work at the same time I've come to find out). Solution: Don't turn on...


ok, first ,, check all the bulbs again, and *** make sure that your hands never touch the actual bulb, these lights will turn the oils from your hands into cooking grease when it comes to these bulbs and cause them to blow out much to early on in their life span, , next,, Pull the light switch ( high beam switch towards you for a quick flash of the head light high beams,, if this doesn't make the high beams come on, your problem is going to be in the switch itself ( what your calling the high beam/turn signal lever) before going to that extreme though,, if you have a junk yard near you, go pull one of the relays off a junked vehicle, and stab it into your system one at a time, it could be something as simple as a relay heating up and disconnecting prematurely due to heat ,, if you don't have a junk yard that you can grab a relay,, here is a link that shows how to check them, But its time consuming http://www.youtube.com/watch?v=C8t25GjZ6i4&NR=1

Aug 10, 2011 | 1996 Jeep Cherokee Sport

3 Answers

1996 jeep cherokee sport headlight low beams wont work. high beams and everything else work, but no low beams.


try taking your tilt steering(steeringwheel) and check which setting its on if the tilt steering is all the way down click it up to the next setting and then try your low beams if that still doesn't work try it one more click up you might have a short or pinched wire in your wheel colum

Aug 17, 2009 | 1996 Jeep Cherokee

Not finding what you are looking for?
1996 Jeep Cherokee Country Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...