Question about 2007 Hyundai Sonata Limited Sedan

2 Answers

My check engine light p0011

My check engine light came on and the code that came up was p0011. Do you know what this means?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 42 Answers

Your camshaft on the intake side is over advanced.

Posted on Mar 10, 2009

  • Dave  C
    Dave C Jun 18, 2011

    Due to a faulty OCV

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Usually means is either due for an oil change due to low oil levels or sludgy oil..

Posted on Mar 28, 2012

1 Suggested Answer

  • 1201 Answers

SOURCE: check engine lights is p0011 how do I fix this problem

I looked up the code you posted, and came back as the camshaft position sensor, which is behind the timing belt cover, if it is the right model.

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0011 2006 chevy impala: camshaft position actuator


You can read all about your code here:
http://www.obd-codes.com/p0011

Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Jul 10, 2015 | 2006 Chevrolet Impala

1 Answer

P0011 VW code


P0011 Volkswagen - 'A' Camshaft Position Timing Over-Advanced Or System Performance Bank 1 ' Add Comment
Possible causes
- Dirty engine oil
- Low engine oil level
- Camshaft actuator circuit open or shorted
- Camshaft actuator circuit poor electrical connection
- Faulty camshaft actuator

Apr 13, 2015 | Volkswagen Cars & Trucks

1 Answer

Code p0011


http://www.datsc.com/tabid/122/OBD-Error-Code/P0011/Diagnostics/Mercedes-Benz/Default.aspx
"..........OBD Code P0011refers to
A code P0011 refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The "A" camshaft is either the intake, left, or front camshaft.

SymptomsPossible sumptoms of OBD code P0011
Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

CausesPossible causes of OBD code P0011
A P0011 DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)

Possible SolutionsThis DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Related CodesP0010 P0012 P0020 P0021 P0022..........."

Oct 04, 2013 | Mercedes-Benz Cars & Trucks

1 Answer

P0011 code


The P0011 means "A" Camshaft Position - Timing Over-Advanced or System Performance.
__________________
mini vci for tis

Aug 29, 2012 | 2006 Chevrolet Monte Carlo

1 Answer

Code p0011 bank 1 intake timing position is over advance,oil light flashes/comes on when i take off/slow down or at complete stops


The computer controls the cam timing by using a solenoid valve inside the engine. The valve works by oil pressure.
The code means the computer can not control the valve timing. Usually the valve is faulty or there is a problem with oil pressure.
Since you say the oil pressure light is coming on, I would expect to find a problem with the oil pump or excessive dirt in the engine.
If the oil pressure switch is good, it will turn the light on when the oil pressure drops below 5 psi. And if it is that low, I doubt oil is reaching the valves.

Jul 20, 2012 | 2002 Nissan Maxima

2 Answers

P0011 Emgine code on 2007 Kia Optima


Have you had a timeing belt done? The code refers to the VVT (Variable Valve Timeing) or VCT (Variable Cam Timeing) Same thing. It may need a cam sensor replaced or a problem with the VVT control solinoid This can happen if the VVT solinoid has been unbolted for some reason. The computer of the car may just need to be re set if your lucky

Jun 27, 2012 | Kia Optima Cars & Trucks

1 Answer

I have a 2005 Kia Spectra. The check engine light has been on and i got it checked. What does engine code Po0011 mean?


Hi Po0011 is not a valid code but if you meant P0011 then it refers to an over advanced cam timing fault.

John

Dec 02, 2010 | 2005 Kia Spectra

1 Answer

Identified as P0011


P0011 - "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

What does that mean?
A code P0011 refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The "A" camshaft is either the intake, left, or front camshaft.

Potential Symptoms:
Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes:
A P0011 DTC trouble code may be caused by one or more of the following:
* Incorrect camshaft timing
* Wiring problems (harness/wiring) in intake timing control valve control solenoid system
* Continuous oil flow to VCT piston chamber
* Failed timing valve control solenoid (stuck open)

Possible Solutions:
This DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Other related DTCs: P0010 - P0011 - P0012 - P0020 - P0021 - P0022

Hope helps (remember rated this).

Jun 25, 2010 | 2003 Nissan Altima

1 Answer

Check engine lights is p0011 how do I fix this problem


I looked up the code you posted, and came back as the camshaft position sensor, which is behind the timing belt cover, if it is the right model.

Mar 10, 2009 | 2007 Hyundai Sonata Limited Sedan

Not finding what you are looking for?
2007 Hyundai Sonata Limited Sedan Logo

1,813 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...