Question about 2006 Ford Taurus

1 Answer

Where can I find the 5 digit keyless entry factory code on my 2006 ford Taurus? The card was not in the glovebox.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 69 Answers

It is sometimes located in the trunk behind one of the quarter panel covers

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the keyless entry code when the former owner is unavalable and I don't know the factory code


On the car, you may find the 5 digit Code on a sticker on a trunklid hinge. Sometimes a sticker is in the doorjam or even under the bottom of the door. The sticker was put in areas that were concealed, yet accessible so that no one walking by would be able to read your secret number. Inside glovebox?

Other than that, the Dealer may be able to match the Vin# from the original build details from your car.

Dec 29, 2013 | 2004 Ford Crown Victoria

2 Answers

How do i reprogram keyless entry codes


door pad keyless codes?

in owner manual, enter permanent code and then press "1" and enter personal code, then press "1" again. Then both codes will work.

If you don't have manual, go to Motorcraft.com and click on technical resources and click on your year owner manual.

---------------------------------------------
Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the Owner Literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit must be entered within five seconds of the previous button press.
Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  1. Press 1/2 within five seconds of Step 1.
  1. Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it will simply overwrite the previous personal code. To erase a personal code, carry out the following procedure:
  1. Enter factory set five-digit code.
  1. Press 1/2 within five seconds of Step 1.
  1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system will now only respond to the factory set code.
Anti-Scan Feature
To provide added security, the keyless entry pad is disabled for one minute after 35 button presses without a valid entry code being entered. The keypad will flash during this one-minute mode with all functionality disabled except for 7/8 and 9/0 still being allowed to lock the vehicle.
Anti-Scan will be turned off after any of the following events:
  • one minute of keypad inactivity
  • the keyless entry remote transmitter UNLOCK button is pressed
  • the ignition is turned to the ON position.
Unlocking the Doors with the Keyless Entry Keypad System
To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will illuminate.
To unlock all doors, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 control within five seconds.
Locking the Doors with the Keyless Entry Keypad System
It is not necessary to enter the factory set or personal code prior to locking all doors. To lock all doors, press the 7/8 and 9/0 controls at the same time.
Inspection and Verification
  1. Verify the customer concern by operating the system.
  1. Visually inspect for obvious signs of mechanical or electrical damage.

Dec 01, 2009 | 2004 Ford F350

1 Answer

2005 LINCOLN AVIATOR


If you have the owners manuel it is in there or just call a dealership if you don't and they can give the factory code to you. Just have your year, model, and v.i.n.

Aug 31, 2009 | 2006 Ford Taurus

1 Answer

Lost my keyless entry code for my 2003 ford expidition


The factory reset code is behind the glove box. To see the code you'll need a flashlight. No other tools.
First, empty the glovebox and open to stops then gently bend those stops at the top of the glovebox in to clear the trim. Swing box down and allow it to hang. Next, you'll see several wiring looms in the right section of the area behind the glovebox. Behind that is the ECM, the componenet you're looking for. It's mounted facing the left side of the truck with a code label on it, so it's a little hard to read. Get a piece of paper and write down the only 5 digit code printed on the label. It's bold face and is one of the bigger numbers but not the biggest. Once you have the code, write whatever 5 digit you want your new code to be on same piece of paper. Go to drivers door, lock truck completely. Enter the factory code into the keyless entry, and within 5 seconds press the 1-2 button on the keyless entry the enter your new code. The truck should unlock. SuPER EASY!!

Jun 27, 2009 | 2003 Ford Expedition

2 Answers

How to reset factory code on keyless entry ford five hundred


if you do not already know the factory code, the only way it can be obtained is by your local ford dealer. the proprietary computer equiptment they have can access the code that is programed in vehicles security module. if you purchased it used..it is often that the keyless entry code id card is still withe the owners manual..it is a 5 digit code printed on an credit card sized card that is white in color..i hope this helps you...good luck

Jun 07, 2009 | 2005 Ford Five Hundred

1 Answer

Keypad reset. Now that I have the original keypad code, how do I change the code?


your owner manual tells you. Why not use the original code?

To change, here is 96 procedure, should be the same. please give good rating if this is what you want.

Entry Code The system (permanent) entry code is located in three places:
  • on the owner's wallet code card (in glove compartment)
  • electronically accessible by requesting the remote anti-theft personality module KEYCODE PID on the New Generation Star (NGS) Tester
  • on the remote anti-theft personality module housing
The remote anti-theft personality module is programmed at the factory with a five-digit entry code. A replacement remote anti-theft personality module includes replacement labels and a new owner's code card. To turn on the interior lamps and light all illuminated components:
  • press any button on the keyless entry keypad (14A626).
To program a temporary access code:
  • Enter the permanent code on the keyless entry keypad.
  • Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
  • Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.

Apr 08, 2009 | 1995 Ford Taurus

2 Answers

Resetting keylees entry code


factory keyless entry codes are the bold 5 digit number located on the keyless entry control module, the module is usually located on the drivers side above the parking brake handle

Mar 24, 2009 | 2005 Ford Taurus

3 Answers

I can't find the keyless entry code for my 2004 ford freestar


The code is on the fuse box under the dash near the hood release. On my van there are two bar codes on a sticker attached to the fuse box. Under the first bar code, on the right side is the 5 digit code (bring your glasses the numbers are really small). After you get this code, just search the internet and there are plenty of forums on programing the keyless remote and also adding your own unique number to the key pad entry.

Good Luck

Mar 08, 2009 | 2004 Ford Freestar

1 Answer

Keyless Entry


If you have the keypad on the door you have it.

Feb 14, 2009 | 2006 Ford Taurus

2 Answers

Keypad keyless entry code missing


Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

Oct 15, 2008 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
2006 Ford Taurus Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...