Question about 1997 Nissan.5 Altima

1 Answer

Wiper Linkage There was some snow and ice on my windshield, I turned the wipers on and my driver's side wiper stopped working. The passenger side worked no problem. So, I took apart the wiper area and found that the linkage to the driver's side wiper had come off. Do you just push it back on or does it screw back on somehow? So, I just pushed it back on, but everything back and now when I turn on the wipers they seem like they're stuck and trying to move. What should I do now? Should I try to retighten everything? I have the same problem; the drivers side quit. How do I get into the linkage? Must the plastic cover all come off? Do the wiper arms pull straight off after removing the nut? 1997 Altima

Posted by on

  • Anonymous Mar 28, 2014

    wipers wont turn off

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Yes the wipers pull off and you need to get the linkage from the dealer the parts just snap on

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

One windshield wiper not working


Maybe the nut that hold the wiper to the linkage is either loose or stripped? The linkage itself is bad?

I think your wiper motor is fine because the passenger side works and uses the same motor to move the wipers.

Mar 25, 2014 | 2001 Ford Taurus

1 Answer

Passenger Side Windshield Wiper Broken


Hi Jill,
The first thing to check is a 13mm nut that holds the wiper arm in place.See if you can move the wiper arm freely back and forth.There is a nut at the base of that wiper arm,Lift up a cover that is hiding the nut. If it comes loose from being froze from ice or snow. Put the wiper in its rest position and tighten the nut back up.

Feb 06, 2014 | 2004 Chevrolet Cavalier

1 Answer

Windshield wiper stopped working


arm/linkage came loose.. its at the base of the windshield..

Dec 30, 2013 | Hyundai Cars & Trucks

1 Answer

2005 Dodge Magnum RT. Drivers side windshield wiper wants to work, but does not. Had a heavy snow and remotely started the car. Forgot the wipers were on. When I noticed it, the Driver side was off the...


You will need to find where in the linkage the problem is. I would start taking it apart to see what is and what isn't working correctly. Autozone website has free repair manuals available online.

Apr 24, 2013 | Cars & Trucks

2 Answers

2009 Touareg passenger side windshield wiper arm does not move but driver side does


sounds like the connecting rod between both wiper arms either broke or one of the keepers popped off under the connector for that arm..since the wiper system IS NOT designed to wisk snow off the window once accumulated, this can an does happen.. even seen motors get burned out doing this..cleaning the window first will save this issue and the equiptment. need to acess this arm<take off the vented peice below the windshield and everything should be visible there..repost findings

Feb 05, 2013 | Cars & Trucks

2 Answers

Passenger side wiper does not work


If the driver side wiper is working then the linkage under the long thin grille at the lower of the windshield has disconnected. You can remove the screws from the wiper cover assy cover and usually snap the link rod back on fairly easy. This usually happens when folks do not take the time in winter to clear the windshield of ice before turning on the wipers. If the wiper blades are stuck to the windshield and you turn them on this linkage will pop off and you can also strip out the wiper arm where it bolts on to the pivot, you can should try and tighten this nut first and get lucky. See if the pivot is moving is so tighten the nut at the bottom of the wiper arm. If the pivot is not turning it is the link rod.

Nov 16, 2010 | 2004 Pontiac Grand Am

1 Answer

2000 Buick Century, Spavinaw, OK, December 26, 2009, 13:21 driving home in snow storm and passenger side quit working , the drivers side works - cleared out all the snow and ice and still does not work...


Remove the wiper arm and check the serrated hub to see if it sheared a pin holding it to the shaft. If it is ok, then you may have a broken/loose part in the linkage. Good luck!

Dec 26, 2009 | 2000 Buick Century

1 Answer

Windshield wiper problem


this could be a result of the linkage coming apart this is located under the cowel and not easy to service. It could also be a result of bad splines between the wiper arm adn wiper arm shaft. if the later is the case you can sometimes tighten the 15 mm nut that holds the arm to the shaft. but this will only work once or twice before the arm requires repolacement. remember folks, wipers are your friend in the winter, they are not ice chippers or snow plows, always clear your windshield with an ice scraper and make sure the wiper blades are not frozen to the glass. this small form of torture in the cold will save you big $$$ in the auto repair shops.

Dec 09, 2008 | 2008 Chevrolet Malibu

1 Answer

Wiper Linkage


Take off both of the wiper arms and try to use wipers if they are moving you didn't install the arms correctly. If thats the case with the arms off and the wipers running turn them off with the wiper switch and wait for them to "park", then tun off the ignition and reinstall the arms in their proper location. Also when the linkage falls off you should replace it with a new one. It is a ball and socket fitting and when it fails it spreads the plastic socket and loosens it up. It is also reccommended when you are inside there you should always replace the linkages in pairs and also check the pivots (the knurled studs that the wiper arms bolt to) for play and if necessary replace these as well. Good luck.

Jul 11, 2008 | 2001 Nissan Altima

1 Answer

Windshield wiper


Check to see if the wiper motor moves the passenger side. If so, You may need to tighten the nut that connects the arm to the motor. Mine was stripped out because or snow & ice. So, I went to home depot and found a lock washer to fit.
Presto.... Nick from DE

Jun 28, 2008 | 1998 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

705 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...