Question about 2000 Chrysler Sebring
Seems worse when the weather is cold, but whenever I am driving and I have to make a turn, the car makes a loud moaning noise as I am turning.
this is caused due to old brakes if you replace them this will fix ur problem but i would reommend replace both sides not jut one
Posted on Dec 05, 2008
SOURCE: Moaning noise in steering column
The probably lubed the intermediat shaft conenction. The loud poping noise could be from them not sitting the boot back correctly. Inspect your boot. As for the moaning noise Only thing I can think of is a hydraulic noise.
Posted on Dec 11, 2008
it does sound like wheel bearing a cv joint dont make noise and then stop but you can jack the car up and in neutral try to shake the tire from side to side.to see if you have any play then turn the wheel by hand try to feel for roughness in bearing. let me know what you find. Phil.
Posted on Jan 07, 2009
this is either a loose belt, or low power steering fluid. Remember that Honda uses a diffrent power steering fluid from everyone else. Make sure it is a Honda compatable fluid, or you will get leaks.
Posted on Jan 12, 2009
Your power steering pump has gone bad. Consider replacing it. I had the same problem before.
It moans when u turn at a stand still but rolls freely when in motion?
Rate this fixya
Posted on Mar 24, 2009
A/C -Heater controls
Has you are aware the A/C Clutch compressor is engaged at all times when the defrost mode is turned on. Turn off all heater controls. If the noise is gone it will be either the Air conditioner compressor clutch bearing or possible the idler pulley bearing .
Posted on Apr 26, 2009
Tips for a great answer:
Mar 14, 2014 | 2008 Suzuki SX4
Feb 12, 2014 | 2006 Chrysler Town & Country
Jan 28, 2013 | 2001 Chrysler Sebring
Feb 22, 2011 | 2000 Chevrolet Malibu
Oct 04, 2010 | 2000 Hyundai Accent
Aug 13, 2010 | 2000 Nissan Maxima
Mar 18, 2010 | 2008 Honda Pilot
Dec 30, 2009 | 2000 Volkswagen Golf
Jan 20, 2009 | 1998 Plymouth Breeze
276 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: