Question about 2004 Ford F150

Open Question

2004 f-150 headlights work on manual,but not on AUTO

I always leave my switch on AUTO i just noticed that my fog lights come on but not the headlights,I turned the switch to manual and the head lights work. i checked the fuses they are good???????????????

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: installing fog lights on a 2004 nissan titan

Have you checked the switches, wires, etc with a test light?

Posted on Jan 03, 2009

  • 1 Answer

SOURCE: low beam headlights not working on 2004 Pontiac Montana extended

You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Posted on Jan 06, 2009

  • 1 Answer

SOURCE: Gauges, Power Windows, Auto Lamps radio interior lights dont work

Sounds like an ignition switch problem, maybe even at the key.

Posted on Feb 21, 2009

chuck943
  • 783 Answers

SOURCE: ford expedition yr'00 headlight not working checked fuses..

The low beam headlamps have a seperate fuse for each lamp in the central or underdash fuse panel.
The right headlamp is fuse fuse 26 (10amp) and the left is fuse 28 (10 amp). These fuse are hot only when headlamps are on so you need to test them with a test light with headlamps on. If they do not have power to them then concern is either headlamp switch or daytime running lamp relay if your vehicle is equipped with this feature, or a bad multifunction switch.
Power leaves the headlamp switch on the RD/YE wire and goes to multifunction switch. It leaves multifunction switch on the other RD/YE wire The wire will then go thru either a connector c2003 located behind the passenger side air bag behind the dash or to the DRL relay if your vehicle has this feature and leaves there on RD/BK wire to the headlights .

Posted on Feb 24, 2009

  • 7353 Answers

SOURCE: 2004 Frontier with Both headlights out. Brights

ck fuses. ck both bulbs. I know its crazy but I have had both bulbs low beam out. if the bulbs are good then the combination switch may be bad.

Posted on Sep 19, 2009

  • 4 Answers

SOURCE: Instrument panel went dead

Checked Every fuse in the fuse box (no small task).This includes #4 - Power point Instrument Panel, #14 - Day time running lamps (auto lamps doesn't work nor does auto lock), #27 - ignition switch run feed, #35 - Instrument Cluster, #41 - Instrument Cluster, #42 - Delayed Accessory, #45 - Ignition switch run/start feed, #102 - Door locks body security module, #103 - Ignition switch, #110 - Ignition switch, & #116 - Ignition switch. But I also check all other ones as well, they all register OK. AC panel & radio work. Turn signals work. Mileage does not work, trip computer does. So, basically, everything works except auto head-lights, auto locks, and the dash cluster (no MPH, RPM, mileage display, Fuel, Temp, Tran Temp, and Oil Pressure).

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 f-350 headlights not working. new mfs, new headlight switch, no power to fuses


Did you check fuse # F2.7 in the central junction box ? This fuse powers the main light switch an the MFS an the headlamp fuses ! Does your truck have auto lights ?

Jun 22, 2015 | 2002 Ford F-350 Super Duty

1 Answer

I have a 96' jeep grand cherokee laredo the head light switch in it is w/o fog lamp and w/o auto headlight can i switch it to one that has auto headlaight


r u trying to figure out if you install the auto headlight switch that you will have auto headlights, of just if the different switch will work period? there is probably a module required to make auto headlamps work, not just a switch. I would probably just find the correct switch for the truck to avoid any issues

Apr 24, 2014 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

2002 jaguar fog lights stay on when turned off


I think this may be due to a defective fog light relay, it is sticking. Check the onwers manual for location, it should be under the hood.

Jun 14, 2012 | Jaguar S-Type Cars & Trucks

1 Answer

Signal lights dont work and want to know where the fog light switch is at


With the switch in sidelight or dip

position, pull the switch to its first

position to turn on the front fog lights.

Pushing the switch in or turning it to OFF
or AUTO will turn off the front fog lights (this is for the front)


With the switch in any position except

OFF or AUTO, pull the switch to its

second position to turn on the rear fog

lights. This will also turn on the front fog

lights unless main beam is selected.

Pushing the switch in or turning it to OFF
or AUTO will turn off the rear fog lights (this is for the rear)

Exterior lighting

Exterior lighting switch

A. OFF.

B. Side (parking) lights.

C. Headlights.

D. Auto.

E. Front fog lights.
F. Rear fog lights.

It is the round knob nest to the steering colume

Aug 18, 2011 | 2003 Jaguar X-Type

1 Answer

I have a 2000 Camaro. My problem is front turn signal/fog light related. First...my fog lights don't come on at all. No biggie but mentioning it due to my second part. With my headlights manually on...


You can replace the parking light/turn signal bulb with LED lights. The LED draw next to nothing in AMPS and produce no heat at all and last for ever. You can pick up the replacement LED lights for your Camaro at most Auto Parts store like Auto Zone or Pep Boys. Good luck and keep me posted for any more questions you may have, I'm running the LED lights on my wife's Montana for that same reason.

Nov 17, 2009 | 2000 Chevrolet Impala

1 Answer

1999 Jeep Grand Cherokee Headlights do not work


I would look at replacing the headlight switch(junkyard will save you money)!

Hope this sheds some light on it!

Oct 23, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Headlights ok, but instrument panel,fog,&parking lights don't


Maybe a relay but maybe and more probably a broken wire Get a diagram Chilton or Haynes manual

Apr 29, 2009 | 1994 Chevrolet Corvette

1 Answer

Question on 1996 intrepid fog lights


Trying pulling light switch outward with headlights on.

Feb 27, 2009 | 1996 Dodge Intrepid

1 Answer

Ford focus lights


the fog lights and the headlights work together. the fog light switch is in the on off switch for the headlights push the knob would be pulled out for your fog lights and pushed in for your headlights and just turn to on position

Jul 05, 2008 | 2003 Ford Focus

Not finding what you are looking for?
2004 Ford F150 Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...