An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: my windshield wiper blades wont work how can I fix...
Try checking the fuse for the wiper blades first if the fuse is good then check the relay for the wiper blades, if the fuse and the relay are both good it is possible that the wiper motor for the blades is bad.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We have the same problem on our 97 Grand Marquis. We have replaced the wiper blades and the drivers wiper arm with a used one. The problem was not completely solved but it did work better. We are going to replace the arm with a new one and see if that works better.
remove wiper arm and check splines on wiper motor or splines on wiper arm for damage if damaged replace. Sometimes arms are just installed with a nut and this nut over time becomes loose check tightness.
It is underneath the black plastic pieces under/below the wipers. There are just a few round fasteners that hold down the passenger side piece that need to be removed to access the filter. You have to remove the windshield wiper arms, then take off the plastic molding that lies between your windshield. Once that is off (it comes out in two pieces) on the passenger side of the car, under the windshield just behind the firewall there is a plastic rain shield with two screws. Remove the rain shield. The cabin filter is under that rain shield. FYI...every bolt is metric, and be careful when removing the plastic molding-only turn those screws a half turn, they break very easily!
Ok, this is a steering column issue. The wiring needs to be replaced. Shouldn't cost much at all. also, the external switch may have issues as well but, i suggest you re wire your steering column to fix this problem.