Question about 1992 Chevrolet S-10

1 Answer

Pleas I need engine repair manual for shevrolet S10 1992 4cyl 2.5l 2dr i have to make overall to the engine by my self so i need correct and original value for every thing in the engine

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

Unless you have lots of time and wish to do this as a hobby or "project car" Though engine building is not terribly complicated, If you make a list of the parts you will need, as well as the special tools (good cylinder hone, ridge cutter, ring compressor and good dial indicator to name a few,) You will find that it is likely a lot faster and cheaper to just buy either a good used or commercially rebuilt engine. Don't forget, After you spend all the money for parts, one small error can cause the entire engine to fail.
If you have the time to do this, you can get good manuals from petersons publishing, Chilton, or motors. Also find a reputable machine shop to work with to do stuff you can't (like boiling block, changing cam bearings and re-surfacing cylinder heads.)
Good luck!

Posted on Mar 10, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

98 lexus es300 a/c fuse #24 keeps blowing

This fuse may serve the compressor clutch. Were you using the AC at the time? If yes, you may need to replace the compressor clutch. There are also a few other circuits on this fuse. See diagrams at the link below.
Repair Guides Overall Electrical Wiring Diagram 1998 Overall Electrical...

Aug 15, 2017 | Lexus ES 300 Cars & Trucks

1 Answer

Is there anyone with a schematic drawing of the Jake's brake system for the Ford Louisville 1990 L9000 models, I understand that this is probably still in a workshop manual. A copy would be great plea

Sorry for my part I believe you will need a Ford service manual OR you might find a repair shop that has aftermarket service manuals such as SNAP-ON TOOLS and that would provide you with this information. I suppose you have googled it already.

Dec 11, 2014 | Ford Cars & Trucks

1 Answer

Toyota code c1301

C1301 Toyota Possible Solution:

The firing order is an important part of the overall design of the engine and is determined during the design of the engine to eliminate as much engine vibration as possible. If the firing order is changed or adjusted, the ignition from the spark plug is delivered at the wrong time and the engine functions poorly or does not run. The firing order for a particular engine is typically found in the repair manual specific to that model.

Jun 23, 2014 | 2006 Toyota Camry

1 Answer


overall the engine does not mean the problem is solved ! sorry. the oil coming out the breather means the engine is not breathing properly. if the arrangement of the rings on the piston is not correct , the engine will have a blow-by... causing sump compression... and push oil through the breather. also sludge blocking passages ie. the tappet cover, will also cause a problem.

Mar 10, 2014 | Volkswagen GTI Cars & Trucks

1 Answer

Engine overall manual

You should be able to buy a repair book at any auto parts store, or order one online from Amazon or Ebay.

Feb 26, 2013 | 1994 Nissan Altima

1 Answer

Removed battery while replacing thermostat in my Lexus RX 330. After completion I started engine to find that my check engine light was on along with my VSC and Trac Off. Engine is also not idling...

Most vehicles now-a-days come equip with an on board computer. This computer stores and records several statistics about the operation, condition, and overall health of the vehicle. When you remove the battery, this computer is reset. The results can be a loss of oil level records (when it was changed, when it needs to be changed) tire pressure defaults, etc. In addition, as the vehicle is driven, the computer makes adjustments to things like fuel injection on the engine and other active tasks to improve mileage or performance.

When you reset the computer, it reset all the data along with it. This may cause the check engine light to come on as the car no longer knows the status of certain frequently changed or replaced parts. Your traction was probably turned off either as a response to this or because it was the default for the vehicle; seek out the manual for your vehicle and it should tell you how to re-enable this feature. Lastly, the idle may seem rough because you reset the computer and it no longer provides a tailored level of fuel injection. Over time, this issue should resolve its self as the computer learns.

May 16, 2011 | 2004 Lexus RX 330

1 Answer

How do i locate my oxygen sensor { bank 1 } , on my 1996 dodge 1500 5.2l?

Hello grandmaster811: My name is Roger and I will help you. According to All Data repair service. You will find bank one sensor one located on the right side of the engine. They are numbered from front to rear as bank i sensor one. bank one sensor two and so on.
Please rate the quality of this answer as this is our way of knowing you received the correct answer. Pleas just ask if you need further help. Thank You for using Fix Ya. Roger

Sep 19, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

2006 check engine light

Even if the vehicle is running good, you still have to make sure that everything's working correctly.

The reason why the CEL (Check Engine Light) is ON, it's because your engine computer found a problem with a sensor or how the engine overall is running Youn need to goto a mechanic shop and have them use a scanner to diagnose the code then tell you what parts and labor it is to repair.

Aug 10, 2009 | 2006 GMC Envoy

1 Answer

I have a water leak on the rear drivers side of the engine. I believe the source is a hose to pipe connection. What would the replacement part be ?

first get an auto repair/maintence manual ,then check the hose for a crack or leak locate by the book where the leak is coming from and buy the correct hose and install it your self. depends on the hose you need hoses start at 10.00 allthe way up to 50.00 or so.

Jul 11, 2009 | 1998 Volvo V70

Not finding what you are looking for?
1992 Chevrolet S-10 Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides