Question about 1989 Volvo 740

1 Answer

My brake vibrates and does not hold at once sometimes while on slow movement especially in go slow and the brake gives a loud noticeable sound before it suddenly stops

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

The Master or one or more of the slave cylinders may be sticky, from grime and dust. They can be cleaned by a professional mechanic, but the seals will need to be replaced, otherwise they'll just gunk up again. Hope that helps!

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Question 1. My 2003 Honda accord vibrates especially when the AC is on and its on drive or neutral gear, but it does not vibrate/shake when its in motion.


Hello,
It sounds as if your Automatic Transmission is having issues. The first thing to do is check the Automatic Transmission Fluid (ATF). This is covered in the Owner's Manual (should be in your glovebox??).

If the level is low, it will cause issues. Your ATF should be serviced every 30,000 miles.

GL,
TD

Apr 28, 2015 | 2003 Honda Accord

2 Answers

Whats making my 1999 mercury sable make a loud roaring sound while driving? and sometimes it stalls when stopping or slowing down.


Used tires sometimes are used for a reason. Also make sure your brakes are releasing completely (especially the emergency brake)...sometimes over-tightening wheels on to the disc brakes can cause excessive noise.

Feb 02, 2015 | 1999 Mercury Sable

1 Answer

Mini one 53 plate vibrating really loud in drive when idle


i would recommend getting exhaust hangers checked at exhaust shop,sounds like exhaust is touching when it is in gear

Jan 15, 2014 | 2002 Kia Rio

1 Answer

Rattling noise in left front end of truck near wheel well at slow speeds


Remove the front wheel and check the wheel bearing, sometimes you may have to may have to put a bar under the wheel and try to lift it up hard, this will give you an indication on where any movement is. THERE IS A PROBLEM and you need to find it

Nov 29, 2013 | 2006 Ford F-150

2 Answers

Daewoo leganza cdx brakes fault- abs seems not to be working, checked both fuses which are o.k. and no warning lights on. This occurred suddenly mid-journey pedal movement increased and braking power...


If there are no warning lights on, I would try to bleed the brakes to see if the pedal movement is decreased and braking power is increased.

Also, check the power booster vacuum hose and check valve to see if there are any leaks.

After turning off the car, pull the check valve off of the booster, and see if you hear a loud hiss.

You may want to wait a few minutes, first, to test that the booster holds vacuum over time.

Good luck on this repair.

Nov 06, 2010 | 2000 Daewoo Leganza

1 Answer

2004 Jeep Grand Cherokee loud grinding sound when braking


It would be hard to guess at you electrical problems but get your brakes checked.It sounds like your pads have worn down to metal on metal.Very dangerous and can get expensive to fix the longer you leave it.A visual inspection can tell within minutes if this is the problem.If this isn't the problem the 2nd most common thing is a loose brake caliper or caliper mount.A friend with some mechanical knowledge will be able to check the brake pad thickness very easily and quickly with just a torch.Hope this helps

May 11, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Suzuki grand vitara vibrates when i step on brake.


check front brake rotors sounds like there warped..or it might be in your drive shafts check for looseness

Mar 08, 2010 | 1999 Suzuki Grand Vitara

1 Answer

Low gears wont slide into gear when in traffic jams or hot.


Sounds like you do need a clutch adjustment.Do you have a hydraulic clutch?Check beside the brake master cylinder and look for a SMALLER size master cylinder which may be low on fluid.(PUT ONLY BRAKE FLUID IN TO FILL IT).Hopefully it is just low and the brake fluid fill will restore your clutch adjustment.

Aug 17, 2009 | 2001 Mazda 626

1 Answer

95 ford explorer, grinding noise/vibration at slow speeds.


CHECK YOUR UNIVERSAILS COULD BE WORN OR DRY U NEED TO PULL OUT THE SHAFT TO CHECK PROPLEY CHECK FOR STIFFNESS AND NOTCHEY MOVEMENT

Dec 16, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Mark Jones

Level 2 Expert

76 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...