An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: transission only moves in reverse
When a transmission gets to this point, it needs to be taken to a reputable trans shop and completely checked out. If fluid is burned or metal contaminated it will likely need a rebuild. If you have no burning etc, check to see if any codes indicating a problem with electronics (such as a shift module)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the car does not move either forward or in reverse gear, then it may be due the following defects:
- Inner cup of one of the CV Joints may have jumped out of the transmission. (Simply push it back in the transmission forcibly)
- Torque converter damaged.
Or there could be something which has gone bad within the transmission assembly, for example:
1. Manual valve.
2. Valve body assembly.
3. Planetary gear unit.
4. Forward clutch.
5. Number 2 one-way clutch.
6. Reverse clutch.
7. 1st and reverse brake.
always let your car warm up some before putting into gear most transmission shops will do a free diagnosis may be something in the way of them gears push clutch in all the way may be a cirrculation issue how old is the clutch in the car
Common problem probably a 4L60E transmission The low and reverse clutches are the same ones The forward clutches are another set and then there are the 3-4 clutches in another pack. So you probably burn out the forward clutches or could be a stuck valve in the valve body. Time for a transmission specialist.
An automatic transmission consists of a series of bands (gears) which is each gear within the transmission. You state that truck will move in reverse, but not in drive. The loud pop you heard was the forward gear band breaking. From this point you have two options...either have the transmission rebuilt or replaced.
No. An emergency brake on the 86 camaro engages the pads against the rotor and the vehicle would not move either in reverse or forward. It sounds like you have a gear problem in the transmission that could be related to either solenoid or actual gear wear. Assuming the vehicle is being MOVED as you say while the engine is running.. thus providing the energy to move it.. Going in reverse has the solenoid engaged one way, drive the other way. Solenoid sounds damaged at this point. Unfortunately this probably will require a transmission rebuild.
Sounds like the car is just slipping out of gear. Keep your hand on the shifter when you back up next time. See if you can feel the shifter move when the car comes out of gear. If the shifter moves up when it happens keep pressure on the shifter holding it back like you dont want it to move forward. And of course if the shifter moves back when it comes out of gear, put forward pressure on the shifter so it doesnt slip out. This might work for now but but i know i wouldnt want to spen 700 for that ****. Let me know how it goes.